Electronics Design Engineer
Company websitesilvustechnologies.com (Silvus Technologies, opens in new tab)
Base salary $100K – $130K
Employer-published annual base salary, USD. Advertised base range in Los Angeles, CA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationLos Angeles, CA
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (4 h ago) · observed since
About this job
Silvus Technologies, a leading provider of advanced MANET and MIMO communications systems, is reshaping mesh network technology for mission-critical applications – on the ground, in the air and at sea. Its battle-proven StreamCaster family of MANET radios and proprietary MN-MIMO waveform provides the vital communications link for defense, law enforcement and public safety agencies around the world, and in the toughest operational environments.
Silvus Technologies is a wholly owned subsidiary of Motorola Solutions, Inc.
Would you like to join an incredibly talented group of people, doing very challenging work, with the prime directive of “Keeping Our Heroes Connected”?
THE OPPORTUNITY
Silvus is seeking an Electronics Design Engineer who will report to the Team Lead, Electronics Design on the Hardware Engineering team. The successful individual in this role will participate in the development of Silvus’ MANET radios and other advanced R&D projects with an emphasis on Electronics Hardware/PCBA design.
This position is based at Silvus Technologies’ headquarters in the heart of vibrant West Los Angeles, CA, and is on a hybrid schedule; a minimum of 3 days onsite per week is expected. On-site days are Mondays, Wednesdays, and Thursdays.
The following is a list of at least some of the current essential job functions of the position. Management may assign or reassign duties and responsibilities at any time at its discretion.
ROLE AND RESPONSIBILITIES
-
Component selection, schematic capture and PCB design of multi-layer PCBs (4-12 layers).
-
Wiring diagram creation for radio wiring harnesses
-
Validate that new PCB and harness designs meet design requirements
-
Follow best practices to achieve successful mixed signal PCB and harness design.
-
Define PCB stack up, materials, and design rules to meet performance requirements and manufacturing feasibility.
-
Perform hardware bring-up, test, and root cause analysis on the bench, using common lab equipment.
-
Work with PCB Designers, Software, FPGA, and RF teams for system-level implementation.
-
Ensure designs do not produce EMI and are well isolated in high EMI environments.
-
Perform other duties as assigned by a supervisor.
REQUIRED QUALIFICATIONS
-
Bachelor of Science Degree in Electrical Engineering, Computer Engineering, or closely related field.
-
Minimum two (2) years of experience in multi-layer PCB design.
-
Experience implementing digital communication peripherals at a hardware level, such as USB 2.0, Ethernet, I2C, and RS232.
-
Experience designing power supply circuitry.
-
Strong familiarity with test equipment such as DMM, bench top supply, oscilloscope, logic analyzer, spectrum analyzer.
-
Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
-
All employment is contingent upon the successful clearance of a background check and drug test.
PREFERRED KNOWLEDGE SKILLS AND ABILITIES
-
Experience with Altium Designer.
-
Competency with simulation tools for high speed digital design and power supply design.
-
Proven experience with Xilinx FPGAs, SoCs and the Vivado IDE.
-
Experience with audio or video codecs.
-
Knowledge of compliance standards such as FCC, CE Mark and MIL-STD-461.
-
Experience with MATLAB, Python, and/or C.
-
Ability to work in a collaborative, multidisciplinary team environment.
-
Problem-solving, data analysis, deductive reasoning, and critical thinking skills.
-
Strong verbal and written communication skills.
WORKING CONDITIONS & PHYSICAL REQUIREMENTS
-
Office environment.
-
Occasional exposure to heat, cold, and allergens while performing tests or demonstrations in the field.
-
While performing the duties of this job, the employee is required to do the following:
-
Lift equipment up to 20 lbs. for the set-up of demonstrations and testing.
-
Perform bending and reaching movements to place items on lower and higher shelves.
-
Kneeling or squatting to access lower shelves.
-
Walking/Moving in the labs.
-
COMPENSATION
The pay range is NOT a guarantee. It is based on market research and peer data, and will vary depending on the candidate’s experience and qualifications.
CA Pay Range
$100,000—$130,000 USD
Consistent with Motorola Solutions values and applicable law, we provide the following information to promote pay transparency and equity. Pay within this range varies and depends on job-related knowledge, skills, and experience. The actual offer will be based on the individual candidate.
NOTE - As a US Federal Contractor, Silvus Technologies requires that ALL candidates being considered for employment for any position (regardless of level) MUST be a U.S. Person (permanent resident or citizen). Stricter U.S. Citizen ONLY requirements (needed for some Engineering or R&D roles) will be included in the Required Qualifications section of the posted position. This does NOT apply to international positions; only job postings for positions located in the US.
Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic.
We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you’d like to join our team but feel that you don’t quite meet all of the preferred skills, we’d still love to hear why you think you’d be a great addition to our team.
We’re committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions. To request an accommodation, please complete this Reasonable Accommodations Form so we can assist you.
Source: Silvus Technologies on Greenhouse · View original posting (opens in new tab)
How this pay compares
Base floor $100,000, not above any of the 3,310 Engineering (non-software) roles in California on this site; none of them lists a lower floor. The employer's range is $30,000 wide, 30% of the floor. First observed today.
Pay in context
Among 3,310 Engineering (non-software) roles in California listed on this site, the median base floor is $146,000 and the middle half runs from $124,000 to $170,000. This role's floor ($100,000) is above 0% of them; 198 others list the same floor.
Base floors of 3,310 Engineering (non-software) roles in California
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 26.2% | 868 |
| $125K to $150K | 29.9% | 991 |
| $150K to $175K | 21.3% | 706 |
| $175K to $200K | 11.2% | 372 |
| $200K to $225K | 6.3% | 209 |
| $225K to $250K | 2.1% | 70 |
| $250K to $275K | 1.7% | 55 |
| $275K and up | 1.2% | 39 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 3,310 open postings with this job family in California
- Sample size
- 3310
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-21
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 21, 2026.
State against nationwide
Median base floor in California vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), California | $146K | 3,310 |
| Engineering (non-software), all states | $136K | 7,592 |
| This job's base floor (marked) | $100K |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 3310 in California; 7592 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-21
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Silvus Technologies pays
This is the lowest base floor among Silvus Technologies's 13 live roles on this site (shared with 1 other). Across them the median floor is $140,000; the middle half runs from $140,000 to $160,000.
Base floors of Silvus Technologies's 13 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 23.1% | 3 |
| $125K to $150K | 46.2% | 6 |
| $150K to $175K | 7.7% | 1 |
| $175K to $200K | 15.4% | 2 |
| $200K to $225K | 7.7% | 1 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 13 open public roles at this employer
- Sample size
- 13
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in California with the nearest published base floor to $100,000, one per employer.
- Sr. Regional Permitting and Compliance Environmental Engineer Mariana Minerals · base floor $100,000
- Hardware System Test Engineer, Special Projects Eight Sleep · base floor $100,000
- Battery Cell R&D Engineer Gotion, Inc · base floor $100,000
- Spacecraft Mechanical Engineer (Early) Apex Technology, Inc. · base floor $100,000
- Fluid Systems Engineer, Responsible Engineer General Matter · base floor $100,000
This listingElectronics Design Engineer$100K – $130K
Electronics Test Engineer$100K – $140K
Senior Electronics Design Engineer$120K – $180K
Senior RF Design Engineer$140K – $190K
Senior Research and Development (R&D) Networked Electronic Warfare Test Engineer$140K – $195K
Senior Embedded Software Engineer - Research and Development (R&D)$140K – $200K
Senior RF Design Engineer$140K – $190K
Chart as a table
| Role | Published base |
|---|---|
| Electronics Design Engineer (this listing) | $100K - $130K |
| Electronics Test Engineer | $100K - $140K |
| Senior Electronics Design Engineer | $120K - $180K |
| Senior RF Design Engineer | $140K - $190K |
| Senior Research and Development (R&D) Networked Electronic Warfare Test Engineer | $140K - $195K |
| Senior Embedded Software Engineer - Research and Development (R&D) | $140K - $200K |
| Senior RF Design Engineer | $140K - $190K |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 21, 2026 (today).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-08-14
Where this pay comes from
Location as the employer wrote it: Los Angeles
$100,000—$130,000 USD
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
