Manager, Electrical Engineering, Avionics
Base salary $175,100 to $236,900
Employer-published annual base salary, USD. Advertised base range in Redmond, WA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationRedmond, WA
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (3 h ago) · observed since
About this job
Amazon Leo is Amazon's low Earth orbit satellite network. Our mission is to deliver fast, reliable internet connectivity to customers beyond the reach of existing networks. From individual households to schools, hospitals, businesses, and government agencies, Amazon Leo will serve people and organizations operating in locations without reliable connectivity.
We are looking for a technical leader, who has a demonstrated track record of building strong engineering teams and delivering complex solutions, to lead the Electrical Engineering team for the Satellite Avionics Bus.
Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Key job responsibilities
- Lead the execution for avionics hardware development for the avionics bus.
- Work with key stakeholders across hardware and software development teams to define subsystem requirements.
- Work within the Electrical & Test engineering team(s) to develop, test, and deliver hardware subsystems for the avionics bus.
- Develop and manage development processes, including architecture reviews, requirement reviews, hardware design reviews, build release reviews, test results reviews, and flight release reviews.
- Partner with cross-functional teams including antenna & RF engineering, propulsion, mechanical engineering, software, test, integration, reliability, compliance/regulatory, manufacturing, program management, etc.
- Hire, lead, and guide the various aspects of the avionics electrical engineering team through architecture, trade studies, technology selection, component selection, circuit design and analysis, schematic capture, design reviews, PCB stack-up design, PCB layout, prototyping, bring-up, testing, characterization, debugging, and productization.
- Contribute to the planning and execution for electrical component and subsystem test plans to ensure robust electrical designs for space applications.
A day in the life
You will lead your team for a variety of tasks for avionics subsystems, from board design, to board bring-up, design validation, and integration. You will work with a cross functional team to perform design validation and qualification testing for your subsystem. As your subsystem continues onto satellite level test and operations, your team will be the subject matter experts that interfaces with the vehicle integration & test and operations teams from test planning through launch and on orbit operations. Your team will be responsible for evaluating hardware health telemetry across test and operations while also developing processes to troubleshoot and to incorporate design improvements for issues discovered.
About the team
Our team designs and delivers the hardware subsystems for the flight computer, propulsion controller, solar array deploy and control, magnetorquer bars, magnetometer, and camera system. We are looking for an Electrical Engineering Manager who has a demonstrated team leadership and will provide deep technical expertise in defining, architecting, implementing, verifying, and deploying to the field highly reliable, power efficient, and low cost electronics that fly the satellite.
Basic Qualifications
- Bachelor's degree in electrical engineering or equivalent
- Bachelor's degree in electrical or mechanical engineering, or 3+ years of management/team lead function experience
- 7+ years designing and/or testing complex, multi-layer, high-speed PCBA designs.
- 7+ years in hardware development across the full product life cycle (concept to production) in Consumer Electronics, Power Electronics, Robotics, Aerospace, Automotive, and/or Communications fields or combination thereof.
- Experience with schematic and layout ECAD tools.
- Experience with PCB design and debugging, including microprocessors, FPGAs, power supplies, and sensors.
- Experience with complex board designs, including high-speed interconnects, high-reliability designs, avionics, vehicle control systems, and/or motor & actuator control electronics.
Preferred Qualifications
- Master's degree or above in electrical engineering, computer engineering, or equivalent
- Experience with the project management of technical projects
- Experience with developing scripts and/or software (Python) that aid the development or testing of hardware.
- Experience automating, building, integrating, and testing systems.
- Experience in development and test of satellite bus systems.
- Experience with integration of systems into aerospace/avionics enclosures.
- Experience with operations of aerospace/avionics systems.
- Electronics design/qualification experience with radiation environments or radiation tolerant hardware.
- Experience with low-level firmware development and integration.
- Experience with RF design and test equipment.
- Experience with space hardware qualification (MIL Std 1540 / SMC-S-016).
- Experience in two or more areas: EMI/EMC test, hardware-in-the-loop testing, design verification test, radiation test, reliability test, and vehicle integration & test.
- Experience developing requirements, test plans, and test procedures for design verification, qualification, and/or manufacturing test.
- Experience designing and delivering test systems to support design verification, qualification, reliability, and/or manufacturing testing.
- Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc.
- 7+ years designing and testing with SoCs, DRAMs, FPGAs, multi-gigabit interfaces, power converters, sensors, operational amplifiers, ADCs/DACs, high speed printed circuit boards, and harnessing.
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at https://amazon.jobs/en/benefits.
USA, WA, Redmond - 175,100.00 - 236,900.00 USD annually
Source: Amazon Leo · View original posting (opens in new tab)
Pay in context
This role's base floor ($175,100) is above 84% of the 519 Engineering (non-software) roles in Washington listed on this site. Their median floor is $136,000; the middle half runs from $119,600 to $159,200.
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 6, 2026.
This listingManager, Electrical Engineering, Avionics$175,100 to $236,900
Optical Development Manager, Amazon Leo$175,100 to $236,900
HW Engineering Manager, Leo Hardware Development$175,100 to $236,900
Design Verification Engineer, Leo Payload FPGA$176,600 to $247,300
Principal Technical Program Manager, Payload SW$177,000 to $239,400
Principal TPM, Enterprise Technology, Amazon Leo Enterprise Engineering & Technology$177,000 to $239,400
Principal Technical Program Manager, Customer Terminals$177,000 to $239,400
Chart as a table
| Role | Published base |
|---|---|
| Manager, Electrical Engineering, Avionics (this listing) | $175,100 - $236,900 |
| Optical Development Manager, Amazon Leo | $175,100 - $236,900 |
| HW Engineering Manager, Leo Hardware Development | $175,100 - $236,900 |
| Design Verification Engineer, Leo Payload FPGA | $176,600 - $247,300 |
| Principal Technical Program Manager, Payload SW | $177,000 - $239,400 |
| Principal TPM, Enterprise Technology, Amazon Leo Enterprise Engineering & Technology | $177,000 - $239,400 |
| Principal Technical Program Manager, Customer Terminals | $177,000 - $239,400 |
Observed changes
- Began meeting the published-salary criteria
- First observed on the employer's board
- Observed since
- Employer-stated posting date
- 2026-07-23
Where this pay comes from
Location as the employer wrote it: US, WA, Redmond
USA, WA, Redmond - 175,100.00 - 236,900.00 USD annually
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.