R&D Mechanical Engineer – Life Sciences
Company websiteagilent.com (Agilent, opens in new tab)
Base salary $127,544 – $199,288
Employer-published annual base salary, USD. Advertised base range in Lexington, MA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationLexington, MA
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (10 h ago) · observed since Last checked 10 h ago. We could not reach the employer's site, so this listing may have closed. Check the employer's page before you apply.
About this job
Job Description
This is an on-site role at Agilent's Lexington, Massachusetts site.
We are looking for an R&D Mechanical Engineer to join the R&D Hardware Team in the Cell and Biomolecular Analysis Division. You will design, develop, test, integrate and verify advanced life science instruments and consumables, from early concept through manufacturing release.
You will own the mechanical side of sustaining product development, new product introduction (NPI) programs and advanced technology initiatives. This includes mechanical system architecture, subsystem development, risk reduction, system integration and commercialization. This role suits a hands-on engineer who enjoys solving complex design problems and turning new hardware ideas into reliable products that can be manufactured at scale.
Technologies You Will Work With
- Precision Motion & Mechanisms: Belt and lead screw drives, stepper motor systems, encoders, precision positioning, flexures, cams, latches and automated mechanisms
- Optical & Detection Systems: Optical sensors, fiber optics, lenses, optical filters, mirrors, alignment and precision mechanical interfaces for optical detection and measurement
- Electromechanical & Fluid Handling Systems: Solenoids, valves, pumps, manifolds, actuators and integrated electromechanical assemblies
- Instrumentation & Automation: Precision mechanical architectures, automated laboratory platforms, motion control systems and complex instrument assemblies
- Life Science Consumables: Injection-molded components, fluidic interfaces, precision molded features and disposable consumables
Key Responsibilities
Mechanical Design & Product Development
- Lead mechanical design and development of current and next-generation life science instruments, consumables and supporting technologies
- Define mechanical architecture, system requirements and subsystem integration strategies
- Develop subsystems from concept and prototyping through verification and manufacturing release
- Perform engineering analyses, including instrument data analysis, tolerance stack-ups, and structural, thermal and motion analysis
- Make sure designs meet performance, reliability, manufacturability and regulatory requirements
Technical Leadership & Collaboration
- Provide mechanical technical leadership across multidisciplinary teams, including electrical, software, firmware, optics, systems, quality and manufacturing
- Lead design reviews, technical assessments and root-cause investigations
- Identify technical risks, drive problem resolution and influence design decisions throughout development and commercialization
Manufacturing & Commercialization
- Partner with Manufacturing, Quality and Supply Chain on product launches and manufacturing transfers
- Drive design for manufacturability, assembly, reliability and cost
- Support supplier development, verification and validation, pilot builds and manufacturing release
- Maintain engineering documentation and product lifecycle requirements
Qualifications
- Bachelor's degree in Mechanical Engineering or a related engineering discipline
- 4+ years of product development experience in life science systems, laboratory automation/robotics, analytical instrumentation, medical devices, optical systems and/or injection-molded consumables
- Demonstrated experience developing complex electromechanical systems from concept through manufacturing release
- Strong expertise in precision mechanical design, mechanism development and system integration
- Proficiency with 3D CAD tools such as Siemens NX, SolidWorks or equivalent
- Strong understanding of Geometric Dimensioning and Tolerancing (GD&T), tolerance analysis, design for manufacturability and production processes
- Experience with engineering analysis methods, including structural, thermal, vibration and tolerance stack-up analysis
- Proven ability to lead cross-functional technical efforts, influence engineering decisions and collaborate across multiple disciplines
- Experience with data analysis, risk management, design verification, validation and manufacturing transfer
Additional Details
This job has a full time weekly schedule. Applications for this job will be accepted until at least November 27, 2026 or until the job is no longer posted.The full-time equivalent pay range for this position is $127,544.00 - $199,288.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: https://careers.agilent.com/locationsAgilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email [email protected] or contact +1-262-754-5030. For more information about equal employment opportunity protections, please visit www.agilent.com/en/accessibility.Travel Required:
10% of the TimeShift:
DayDuration:
No End DateJob Function:
R&DSource: Agilent on Workday · View original posting (opens in new tab)
How this pay compares
Base floor $127,544, above 38% of the 434 Engineering (non-software) roles in Massachusetts on this site; the other 62% list the same floor or a higher one. The employer's range is $71,744 wide, 56% of the floor. First observed today.
Pay in context
Among 434 Engineering (non-software) roles in Massachusetts listed on this site, the median base floor is $131,285 and the middle half runs from $116,960 to $150,000. This role's floor ($127,544) is above 38% of them.
Base floors of 434 Engineering (non-software) roles in Massachusetts
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 36.4% | 158 |
| $125K to $150K | 36.9% | 160 |
| $150K to $175K | 15.4% | 67 |
| $175K to $200K | 7.8% | 34 |
| $200K to $225K | 3.2% | 14 |
| $225K to $250K | 0.2% | 1 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 434 open postings with this job family in Massachusetts
- Sample size
- 434
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-21
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 21, 2026.
State against nationwide
Median base floor in Massachusetts vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), Massachusetts | $131,285 | 434 |
| Engineering (non-software), all states | $136K | 7,592 |
| This job's base floor (marked) | $127,544 |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 434 in Massachusetts; 7592 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-21
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Agilent pays
27 of Agilent's 41 live roles on this site list a higher base floor and 13 list a lower one. Across them the median floor is $139,440; the middle half runs from $116,800 to $163,008.
Base floors of Agilent's 41 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 31.7% | 13 |
| $125K to $150K | 29.3% | 12 |
| $150K to $175K | 22.0% | 9 |
| $175K to $200K | 14.6% | 6 |
| $200K to $225K | 0.0% | 0 |
| $225K to $250K | 2.4% | 1 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 41 open public roles at this employer
- Sample size
- 41
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in Massachusetts with the nearest published base floor to $127,544, one per employer.
- Process Engineer Applied Materials · base floor $128,000
- Laser Systems Engineer QuEra Computing, Inc · base floor $128,000
- Sr. Engineer - Combination Product Inhalation Device Lead Amgen · base floor $127,044
- Senior Electrical Engineer Re:Build Manufacturing · base floor $127,000
- Senior Electrical Engineer, Test Infrastructure Form Energy · base floor $128,662
This listingR&D Mechanical Engineer – Life Sciences$127,544 – $199,288
Hardware Automation Engineer$130,240 – $203,500
SAP Business Technology Platform (BTP) Technical Lead$127,680 – $199,500
SAP S/4HANA Domain Architect (Finance or Supply Chain)$127,680 – $199,500
SAP Technical Lead$127,680 – $199,500
Customer Facing Field Project Manager$124,976 – $195,275
R&D Scientist - Materials Science$136,618 – $239,400
Chart as a table
| Role | Published base |
|---|---|
| R&D Mechanical Engineer – Life Sciences (this listing) | $127,544 - $199,288 |
| Hardware Automation Engineer | $130,240 - $203,500 |
| SAP Business Technology Platform (BTP) Technical Lead | $127,680 - $199,500 |
| SAP S/4HANA Domain Architect (Finance or Supply Chain) | $127,680 - $199,500 |
| SAP Technical Lead | $127,680 - $199,500 |
| Customer Facing Field Project Manager | $124,976 - $195,275 |
| R&D Scientist - Materials Science | $136,618 - $239,400 |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 21, 2026 (today).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-11-20
Where this pay comes from
Location as the employer wrote it: US-MA-Lexington
The full-time equivalent pay range for this position is $127,544.00 - $199,288.00/yr plus eligibility for bonus, stock and benefits. Our pay
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
