Senior Production Manager
Company websitesenrasystems.us (Senra Systems, opens in new tab)
Base salary $165K – $215K
Employer-published annual base salary, USD. Advertised base range in Cypress, CA +1 more
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationCypress, CA +1 more
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (8 h ago) · observed since Last checked 8 h ago. We could not reach the employer's site, so this listing may have closed. Check the employer's page before you apply.
All places named
- Cypress, CA
- Redondo Beach, CA
About this job
Senra Systems is building the modern wire harness factory for aerospace and defense.
We combine advanced manufacturing, software, and automation to fundamentally rethink how complex electromechanical systems are quoted, procured, and built. Our customers include some of the fastest-growing aerospace, defense, and industrial technology companies in the world.
As Senior Production Manager, you will extend the ownership of a standard Production Manager across both of Senra’s facilities, driving consistent operational excellence in wire harness manufacturing across Redondo Beach and Cypress. You will directly manage Production Supervisors and Production Managers, indirectly leading a growing technician workforce of 100+ across both sites, while also serving as the primary point of coverage for the Head of Production on cross-site priorities.
You are accountable for factory-wide floor performance, labor allocation, production scheduling, capacity planning, and building a bench of strong leaders who can run each site with minimal oversight. You drive a high-performance culture of clarity, accountability, and continuous improvement, and you standardize what “good” looks like across every shift and every site.
This role is for a leader who has already run production at the Production Manager level and is ready to own multi-site standardization and the strategic side of scaling a factory, while never losing the tactical instinct to walk the floor and solve problems in real time.
What you’ll own:
Production Execution (Site + Cross-Site)
- Own production performance across both Redondo Beach and Cypress — OTD, throughput, and high FPY results at each site and in aggregate.
- Standardize labor allocation, daily production planning, and floor management cadence across sites so performance doesn’t vary by location.
- Set and enforce a consistent floor management cadence across sites: start-of-shift alignment, floor walks, end-of-shift reporting.
- Own escalation and resolution of part/material issues, process barriers, and resource gaps that cross site or team boundaries.
Quality, Safety, and Continuous Improvement
- Ensure builds meet workmanship standards (IPC-620, internal workmanship guides) consistently across both sites.
- Lead and standardize the frontline response and corrective action process for quality escapes and non-conformances company-wide.
- Coordinate with IE and MFG Excellence teams for a continuous improvement roadmap — line design & balancing, focused kaizens, and flow improvements — with initiatives that scale across sites.
- Champion safe, organized, and disciplined workspaces (5S) as a shared standard across all production areas.
Strategic & Cross-Site Leadership
- Partner directly with the Head of Production on capacity planning, headcount planning, and budget/CAPEX input as the factory scales.
- Represent production in longer-range planning conversations, translating floor-level insight into staffing, equipment, and process investment recommendations.
- Serve as the go-to leader across sites when the Head of Production needs coverage on production priorities.
Cross-Functional Partnering
- Collaborate with Manufacturing Engineering on work instruction feedback and process improvement recommendations, ensuring consistent adoption across sites.
- Work with Supply Chain to resolve part constraints and maintain production readiness via structured clear-to-builds at both facilities.
- Partner with the Estimating & Customer Programs team to incorporate customer-driven changes into production workflows across sites, maintaining a tight feedback loop on in-WIP work.
- Drive alignment with the Plant Director on weekly production plans, KPI performance, and improvement priorities across the full factory footprint.
Supervisory Responsibilities
- Directly manages Production Supervisors, indirectly leading 100+ technicians across Redondo Beach and Cypress.
- Conducts regular 1:1s with direct reports, coaches on leadership rhythm, and holds them to staffing and performance outcomes.
- Owns development of the leadership bench across both sites, including mentoring Production Supervisors.
- Builds and maintains a high-accountability culture grounded in performance, safety, workmanship, and continuous improvement standards, consistently applied company-wide.
- Partners with Training to ensure apprenticeship development and continuous learning objectives are executed consistently across all technicians, regardless of site.
What you’ll bring to the team:
- 12+ years of leadership experience in fast-paced manufacturing (aerospace & defense electrical experience highly preferred).
- Minimum of 5 years of direct experience as a Production Manager or equivalent in an early-stage start-up or contract manufacturer, including experience managing other managers or supervisors.
- Strong communication skills across all levels, from technicians to executive leadership.
- Proven success leading large, multi-site or multi-shift production organizations.
- Strong strategic and day-to-day execution leadership: capacity planning, scheduling, labor planning, shift management.
- Experience driving performance through KPIs, accountability systems, and coaching — including coaching other managers.
- Proficiency with ERP/MRP systems and work order workflows.
- Hands-on approach — comfortable spending significant time on the production floor across multiple sites.
- Must be able to lift up to 35 lbs.
- Regular, frequent travel between Senra’s Redondo Beach and Cypress facilities required.
Preferred:
- Experience in electrical/harness manufacturing, avionics, or precision assembly.
- Experience with IPC-620 or AS9100 environments.
- Track record designing and scaling continuous improvement programs across multiple sites or shifts.
- Experience building or formalizing a leadership development program for production teams.
- Background managing production budgets or CAPEX planning.
Compensation:
- Compensation will be based on experience, qualifications, and other job-related factors.
- Salary Range: $165,000 - $215,0000
- This is an onsite role at our headquarters in Redondo Beach, CA or Cypress, CA.
Benefits:
- Unmatched opportunities to drive impact on a friendly and mission-driven team
- Own a piece of the pie with equity participation!
- Comprehensive medical, dental, vision, life and long-term disability coverage
- Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses
- 20 vacation days per year and 12 company holidays for rest and relaxation
- a 401(k) plan to set yourself up for retirement
- Choose a record you love, and we’ll add it to our growing vinyl collection!
- $50/month DoorDash credit – lunch is on us!
- Up to $100/month reimbursement for gym memberships
- Fully stocked kitchen with snacks and beverages
- Regular team-building events, lunches, and the occasional breakfast burrito!
- Bright, open office with communal spaces for collaboration and free parking
- Conveniently located near the metro, major freeways and local dining spots
We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Contact us at [email protected] or visit our website https://senrasystems.us.
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
Pay range
$165,000—$215,000 USD
Source: Senra Systems on Greenhouse · View original posting (opens in new tab)
How this pay compares
Base floor $165,000, above 74% of the 678 Manufacturing & Production roles in California on this site. The employer's range is $50,000 wide, 30% of the floor. First observed today.
Pay in context
Among 678 Manufacturing & Production roles in California listed on this site, the median base floor is $146,000 and the middle half runs from $122,700 to $164,750. This role's floor ($165,000) is above 74% of them; 5 others list the same floor.
Base floors of 678 Manufacturing & Production roles in California
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 26.4% | 179 |
| $125K to $150K | 36.3% | 246 |
| $150K to $175K | 19.0% | 129 |
| $175K to $200K | 9.6% | 65 |
| $200K to $225K | 5.9% | 40 |
| $225K to $250K | 0.7% | 5 |
| $250K to $275K | 1.5% | 10 |
| $275K and up | 0.6% | 4 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 678 open postings with this job family in California
- Sample size
- 678
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.
State against nationwide
Median base floor in California vs nationwide
Table
| Value | postings | |
|---|---|---|
| Manufacturing & Production, California | $146K | 678 |
| Manufacturing & Production, all states | $133,500 | 1,326 |
| This job's base floor (marked) | $165K |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 678 in California; 1326 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Senra Systems pays
5 of Senra Systems's 13 live roles on this site list a higher base floor and 7 list a lower one. Across them the median floor is $140,000; the middle half runs from $125,000 to $180,000.
Base floors of Senra Systems's 13 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 23.1% | 3 |
| $125K to $150K | 30.8% | 4 |
| $150K to $175K | 7.7% | 1 |
| $175K to $200K | 23.1% | 3 |
| $200K to $225K | 7.7% | 1 |
| $225K to $250K | 0.0% | 0 |
| $250K to $275K | 7.7% | 1 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 13 open public roles at this employer
- Sample size
- 13
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Manufacturing & Production roles in California with the nearest published base floor to $165,000, one per employer.
- Supplier Quality Engineer Atomic Machines · base floor $165,000
- Sr. Manager / Associate Director, Quality Events Personalis, Inc · base floor $165,000
- Sr. Quality Assurance & Reliability Engineer Reliable Robotics · base floor $165,000
- Machine Shop Manager Astro Mechanica · base floor $165,000
- Senior Product Manager CHAOS Industries · base floor $165,000
This listingSenior Production Manager$165K – $215K
Senior Robotics Engineer, Production$180K – $220K
Senior Robotics Engineer, Data & Perception$180K – $230K
Senior Test Engineer$140K – $175K
Senior Product Manager$140K – $200K
Head of Customer Programs$195K – $300K
Senior Robotics Engineer, Robot Learning$200K – $260K
Chart as a table
| Role | Published base |
|---|---|
| Senior Production Manager (this listing) | $165K - $215K |
| Senior Robotics Engineer, Production | $180K - $220K |
| Senior Robotics Engineer, Data & Perception | $180K - $230K |
| Senior Test Engineer | $140K - $175K |
| Senior Product Manager | $140K - $200K |
| Head of Customer Programs | $195K - $300K |
| Senior Robotics Engineer, Robot Learning | $200K - $260K |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 19, 2026 (today).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-11-19
Where this pay comes from
Location as the employer wrote it: Cypress, California, United States; Redondo Beach, California, United States
- Salary Range: $165,000 - $215,0000
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
