Six Figure Work

Sr. Supplier NPI & Industrialization Engineer, Electrical (PCB/PCBA)

Reliable Robotics

Company websitereliable.co (Reliable Robotics, opens in new tab)

Base salary $140K – $205K

Employer-published annual base salary, USD. Advertised base range in Mountain View, CA

Apply (opens in new tab)

You apply on the employer's own site. Six Figure Work does not handle applications.

  • LocationMountain View, CA
  • WorkplaceWorkplace not stated
  • Status at last checkSource accepting applications when checked
  • Last checked (17 min ago) · observed since

About this job

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods — and eventually people — move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient, and fundamentally transformative to the way goods — and eventually people — move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics, and self-driving cars, working to make this future a reality.

As a Senior Supplier NPI & Industrialization Engineer, Electrical (PCB/PCBA), you will serve as the primary technical authority for the New Product Introduction (NPI) and manufacturing readiness of external electrical hardware, including complex printed circuit boards (PCBs), PCB assemblies (PCBAs), and custom electronic modules. You will own supplier industrialization across all program lifecycle phases from early R&D concept reviews and Low-Rate Initial Production (LRIP) through FAA certification baselines and full-rate production.

In this role, you will bridge the gap between design engineering and our supply chain. You will evaluate supplier technical capabilities, lead Design for Excellence (DFx) programs, drive capacity and tooling scale-up, architect incoming quality infrastructure, and resolve complex anomalies to ensure our airborne electronics meet the most stringent standards of safety, quality, yield, and airworthiness.

Responsibilities

  • Supplier Industrialization: Qualify, ramp, and scale external manufacturing lines; validate tooling/fixtures (stencils, pallets, carriers); and establish cycle-time and throughput targets for volume production.

  • DFx & Hardware Readiness: Partner with hardware design teams to lead DFM/DFA/DFT reviews, optimize First Pass Yield (FPY), and eliminate single-source or component obsolescence risks early in the NPI lifecycle.

  • Process Qualification & Part Validation: Lead supplier Advanced Product Quality Planning (APQP) execution from kick-off through Production Part Approval Process (PPAP) approval and validate compliance through robust First Article Inspections (FAIs) per AS9102.

  • Technical Sourcing & Assessments: Partner with Strategic Sourcing to serve as the lead technical authority for evaluating, auditing, and down-selecting external electrical and avionics suppliers using objective capability matrices and risk models.

  • Root Cause & Yield Optimization: Lead cross-functional RCCA investigations (8D, 5-Why) for supplier fallout and flight-test escapes; analyze production telemetry to eliminate bottlenecks and reduce scrap.

Basic Success Criteria

  • Bachelor’s degree in Electrical, Manufacturing, Mechanical, Materials Science Engineering, or a related field.

  • 6+ years of experience in NPI, manufacturing engineering, or supplier industrialization of high-reliability PCBs/PCBAs in safety-critical sectors.

  • Strong technical background in DFM/DFA/DFT, high-density multi-layer board fabrication, SMT processes, and conformal coating.

  • Direct experience with board-level electrical test methods and implementing quality tools (PFMEA, Control Plans, SPC).

  • Proficiency with root cause analysis and defect investigation methodologies (8D, 5-Why).

  • Familiarity with quality inspection setups, including 3D AOI, AXI, and micro-section analysis.

  • Experience using ECAD/MCAD viewers and PLM systems, with willingness to travel 25–35% for supplier audits.

Preferred Criteria

  • Master’s degree in Electrical, Industrial & Systems, or Materials Science Engineering.

  • Aerospace & Certification Rigor: Direct experience maintaining configuration control (ECOs, deviations) under civil aviation frameworks.

  • Industry Standards & Counterfeit Mitigation: Active or prior certification/fluency in IPC-A-610 Class 3, J-STD-001 (Space addendum), IPC-6012 Class 3, and counterfeit parts mitigation standards (AS5553 / AS6174).

  • Global Scale: Experience qualifying, auditing, and ramping global Tier-1 and Tier-2 electronics contract manufacturers (CMs) and bare-board fabricators.

  • Safety-Critical Requirements: Experience with high-reliability electronics development and safety-critical hardware standards in aerospace or automotive environments.

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 25% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant’s capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to [email protected]

Source: Reliable Robotics on Ashby · View original posting (opens in new tab)

How this pay compares

Base floor $140,000, above 43% of the 678 Manufacturing & Production roles in California on this site; the other 57% list the same floor or a higher one. The employer's range is $65,000 wide, 46% of the floor. Observed open for 22 days so far (since Oct 29, 2026).

Pay in context

Among 678 Manufacturing & Production roles in California listed on this site, the median base floor is $146,000 and the middle half runs from $122,700 to $164,750. This role's floor ($140,000) is above 43% of them; 14 others list the same floor.

Base floors of 678 Manufacturing & Production roles in California

Base floors of 678 Manufacturing & Production roles in California$100K to $125K: 26.4% (179); $125K to $150K: 36.3% (246); $150K to $175K: 19.0% (129); $175K to $200K: 9.6% (65); $200K to $225K: 5.9% (40); $225K to $250K: 0.7% (5); $250K to $275K: 1.5% (10); $275K and up: 0.6% (4)0%10%20%30%40%26%10036%12519%15010%1756%200<1%2251%250<1%275This job $140K
Each bar counts postings on this site by published base floor, in $K. The marker is this job's floor.
Table
Base floors of 678 Manufacturing & Production roles in California
Floor bandSharePostings
$100K to $125K26.4%179
$125K to $150K36.3%246
$150K to $175K19.0%129
$175K to $200K9.6%65
$200K to $225K5.9%40
$225K to $250K0.7%5
$250K to $275K1.5%10
$275K and up0.6%4
How this is calculated
Statistic
Base floor distribution of the cohort
Formula
count of cohort postings in each $25K band of published base floor / postings in the cohort
Denominator
678 open postings with this job family in California
Sample size
678
Hidden when
the cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.

State against nationwide

Median base floor in California vs nationwide

Median published base floor of the same job family, in this state and across all states, next to this job's floor.
Table
Median base floor in California vs nationwide
Valuepostings
Manufacturing & Production, California$146K678
Manufacturing & Production, all states$133,5001,324
This job's base floor (marked)$140K
How this is calculated
Statistic
Median floor, state vs nationwide
Formula
median published base floor of each cohort
Denominator
open postings of this job family
Sample size
678 in California; 1324 nationwide
Hidden when
either cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

How Reliable Robotics pays

46 of Reliable Robotics's 54 live roles on this site list a higher base floor and 6 list a lower one. Across them the median floor is $185,000; the middle half runs from $160,000 to $205,000.

Base floors of Reliable Robotics's 54 live roles

Base floors of Reliable Robotics's 54 live roles$100K to $125K: 9.3% (5); $125K to $150K: 7.4% (4); $150K to $175K: 24.1% (13); $175K to $200K: 33.3% (18); $200K to $225K: 25.9% (14)0%10%20%30%40%9%1007%12524%15033%17526%200This job $140K
Each bar counts this employer's live roles by published base floor, in $K. The marker is this job's floor.
Table
Base floors of Reliable Robotics's 54 live roles
Floor bandShareRoles
$100K to $125K9.3%5
$125K to $150K7.4%4
$150K to $175K24.1%13
$175K to $200K33.3%18
$200K to $225K25.9%14
How this is calculated
Statistic
Employer base floor distribution
Formula
count of the employer's open roles in each $25K band of published base floor / its open roles
Denominator
54 open public roles at this employer
Sample size
54
Hidden when
this employer has fewer than 5 roles
Calculation version
jobpage-analysis-v1
Data as of
current
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Similar pay elsewhere

Other employers' Manufacturing & Production roles in California with the nearest published base floor to $140,000, one per employer.

This range next to 6 other live Reliable Robotics roles with the nearest advertised base floor
Chart as a table
This range next to 6 other live Reliable Robotics roles with the nearest advertised base floor
RolePublished base
Sr. Supplier NPI & Industrialization Engineer, Electrical (PCB/PCBA) (this listing)$140K - $205K
Sr. RF Test Engineer$140K - $225K
FPGA Design Engineer, Radar$145K - $165K
Client Platform Engineer$125K - $185K
Embedded Software Engineer, Radar$155K - $215K
Flight Software Engineer$155K - $215K
Flight Navigation Engineer$155K - $215K

Same $100K to $400K scale as every card. All Reliable Robotics roles · How to read the bar

Observed changes

  1. First observed on the employer's board, already publishing a qualifying base salary
  2. Listing details edited by the employer
Observed since
Employer-stated posting date
2026-11-07
Where this pay comes from

Location as the employer wrote it: Mountain View, CA

USD 140,000 – 205,000 · 1 YEAR · Salary

Method
Structured pay field published by the employer
Checked
Rule set
us-base-v2

The employer's job board publishes this pay as a dedicated data field. We read the field directly; no interpretation was needed.

What we verified

  • The pay figures come from the employer's own listing, quoted exactly above.
  • The pay is an annual base salary in US dollars with a minimum of at least $100,000.
  • The role was publicly listed on the employer's job board when last checked.

We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.

Get Six Figure Work by email

Pick what you want. Nothing is selected for you unless it matches the page you are on, and nothing is sent until you confirm from a link we email you.

What would you like to receive?

A short weekly note on what employer-published pay data shows: who pays what, where, and what is changing. Once a week.

Practical notes for job seekers: interviewing, applying for six-figure roles, and making an upward move. About twice a month.

New jobs that match a search you choose. Every job listed has an employer-published base salary of $100,000 or more. At most one email a day (or weekly, your choice). Nothing is sent on days with no new matches. Alerts cover every new job, because this page has no filters.

We email you only after you confirm from a link we send to this address. We do not sell or share your address. Every email has a one-click unsubscribe link. How we handle your email.