Staff Power Electronics Engineer, Energy Storage
Company websiteredwoodmaterials.com (Redwood Materials, opens in new tab)
Base salary $182,500 – $242,500
Employer-published annual base salary, USD. Advertised base range in San Francisco, CA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationSan Francisco, CA
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (5 h ago) · observed since
About this job
About Redwood Materials
Redwood Materials was founded in 2017 by JB Straubel, co-founder and former CTO of Tesla, on a simple but radical idea: the critical minerals powering the energy transition already exist. They just need to come back. Today Redwood is the largest lithium-ion battery recycler in North America — recovering, refining, and redeploying critical minerals from end-of-life batteries back into the supply chain. On the energy side, Redwood has deployed the largest second-life battery project in the world, delivering power to AI data centers in months rather than years using proprietary energy architecture engineered entirely in-house. The company is profitable, the market it operates in is projected to grow 20 to 50 times over the next decade, and Redwood is the only company with the supply chain, the technology, and the operational scale to lead it.
Position Summary:
The Power Electronics Engineer, Energy Storage designs and develops power conversion systems for Redwood's next-generation Battery Energy Storage Systems (BESS), including converters that interface with battery packs, battery modules, photovoltaic systems, and the grid for utility-scale and data center applications. This is a fully on-site role at 100 Hooper, San Francisco. The engineer independently owns complex circuit- and system-level problems spanning converter topology selection, power-stage component selection, magnetics design, PCB/PCBA layout, thermal analysis, and validation, adapting existing approaches and precedent to new and unusual design challenges. The role partners extensively with Mechanical, Firmware/Controls, Systems, Compliance, Supply Chain, and Manufacturing teams to take designs from concept through production. Success depends on sound engineering judgment, hands-on lab validation skills, and the ability to resolve ambiguous technical trade-offs with limited direction.
Essential Duties and Responsibilities
- Design high-voltage (800V – 25kVdc, 480–800Vac) and high-power (10kW–500kW) converters tailored for utility-scale BESS and industrial infrastructure.
- Conduct comprehensive topology comparison and trade-off analyses evaluating efficiency, power density, cost, and manufacturability.
- Perform power-stage component sizing and Si/SiC MOSFET selection based on loss modeling and thermal management.
- Design robust gate driver circuits and dedicated gate driver power supplies to ensure safe, high-frequency switching operations.
- Lead the design, modeling, and specification of custom magnetic components, including transformers and inductors utilizing Litz-wire or PCB-winding architectures.
- Architect the low-voltage (LV) subsystem, including auxiliary power supplies, sensing circuitry (voltage/current/temperature), and hardware-level protection.
- Design and optimize EMI filters, including differential-mode and common-mode inductors, X/Y-caps, and damping elements.
- Drive high-voltage, high-power PCB/PCBA layout design, ensuring clearance/creepage rules and signal integrity under high-noise environments.
- Collaborate with cross-functional teams (Mechanical, Controls/Firmware, Supply Chain, Manufacturing, Compliance) to define requirements, test specifications, and achieve industry certifications
Skills, Knowledge, and Abilities
- MS or PhD in Electrical Engineering, with a focus on power electronics.
- 5-7 years of experience in electrical engineering, with a strong focus on power conversion or energy storage products, ideally for mass production.
- Hands-on experience in high-voltage (up to 1.5kVdc and 800Vac) hardware design. Experience in high voltage (up to 25kVdc, 34.5kVac) for SST is a plus.
- Experience with power semiconductor selection, gate drive design, and hardware protection circuits.
- Deep understanding of power electronics topologies and fundamentals (AC/DC, DC/DC).
- Proficiency with circuit simulation, FEA simulation, and CAD tools (e.g., Simulink, LTspice, Ansys Maxwell/Q3D, Altium Designer).
- Demonstrated ability to perform detailed layout of high-power, noise-sensitive PCBs in Altium or equivalent CAD software.
- Proficiency with lab equipment, including oscilloscopes, impedance analyzers, network analyzers, and signal generators.
- Excellent written and verbal communication skills, with the ability to effectively collaborate across diverse cross-functional teams.
- Foundational knowledge of control theory and embedded systems.
- Strong analytical and systematic problem-solving skills.
- Proven track record of rapid prototyping and hardware iterations based on cross-functional and supplier feedback.
- Strong ability to select circuit components considering both electrical performance and manufacturability (DFM).
- Experience mentoring test technicians to execute design verification, interpret test data, and define component maturity criteria.
In accordance with California pay transparency laws, the salary range for this position is listed below. Actual compensation may vary based on a variety of factors, including experience, education, and skills.
California Pay Range:
$182,500—$242,500 USD
The position is full-time. Compensation will be commensurate with experience.
We collect personal information (PI) from you in connection with your application for employment with Redwood Materials, including the following categories of PI: identifiers, personal records, professional or employment information, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. If you have additional privacy-related questions, please contact us at [email protected].
Source: Redwood Materials on Greenhouse · View original posting (opens in new tab)
How this pay compares
Base floor $182,500, above 82% of the 3,313 Engineering (non-software) roles in California on this site. The employer's range is $60,000 wide, 33% of the floor. Observed open for 1 day so far (since Nov 19, 2026).
Pay in context
Among 3,313 Engineering (non-software) roles in California listed on this site, the median base floor is $146,000 and the middle half runs from $124,000 to $170,000. This role's floor ($182,500) is above 82% of them.
Base floors of 3,313 Engineering (non-software) roles in California
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 26.0% | 863 |
| $125K to $150K | 30.2% | 999 |
| $150K to $175K | 21.1% | 700 |
| $175K to $200K | 11.4% | 377 |
| $200K to $225K | 6.3% | 208 |
| $225K to $250K | 2.1% | 70 |
| $250K to $275K | 1.7% | 56 |
| $275K and up | 1.2% | 40 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 3,313 open postings with this job family in California
- Sample size
- 3313
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.
State against nationwide
Median base floor in California vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), California | $146K | 3,313 |
| Engineering (non-software), all states | $136K | 7,616 |
| This job's base floor (marked) | $182,500 |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 3313 in California; 7616 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Redwood Materials pays
9 of Redwood Materials's 39 live roles on this site list a higher base floor and 29 list a lower one. Across them the median floor is $162,500; the middle half runs from $140,000 to $181,250.
Base floors of Redwood Materials's 39 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 12.8% | 5 |
| $125K to $150K | 15.4% | 6 |
| $150K to $175K | 38.5% | 15 |
| $175K to $200K | 20.5% | 8 |
| $200K to $225K | 7.7% | 3 |
| $225K to $250K | 5.1% | 2 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 39 open public roles at this employer
- Sample size
- 39
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in California with the nearest published base floor to $182,500, one per employer.
- Guidance Navigation & Control Engineers (Senior or Principal) Boeing · base floor $182,750
- Manager, Quantum Systems Validation PsiQuantum · base floor $182,200
- Head of Validation - Manufacturing Gilead Sciences · base floor $182,070
- Process Safety Engineer Antora Energy · base floor $183,000
- Senior Technical Program Manager, Systems Integration Agility Robotics · base floor $182,000
This listingStaff Power Electronics Engineer, Energy Storage$182,500 – $242,500
Infrastructure Software Engineer, Energy Storage$180,000 – $237,500
Software Engineer - Site Controller, Energy Storage$180,000 – $237,500
Supplier Industrialization Engineer, Mechanical Components$177,500 – $235,000
Staff Global Supply Manager, Construction$186K – $215K
Senior Battery Data Engineer$172,500 – $198,000
Substation Protection and Control Engineer, EPC$190,000 – $252,500
Chart as a table
| Role | Published base |
|---|---|
| Staff Power Electronics Engineer, Energy Storage (this listing) | $182,500 - $242,500 |
| Infrastructure Software Engineer, Energy Storage | $180,000 - $237,500 |
| Software Engineer - Site Controller, Energy Storage | $180,000 - $237,500 |
| Supplier Industrialization Engineer, Mechanical Components | $177,500 - $235,000 |
| Staff Global Supply Manager, Construction | $186K - $215K |
| Senior Battery Data Engineer | $172,500 - $198,000 |
| Substation Protection and Control Engineer, EPC | $190,000 - $252,500 |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 19, 2026 (1 day ago).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-10-14
Where this pay comes from
Location as the employer wrote it: San Francisco, California, United States
$182,500—$242,500 USD
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
