Thermal Analysis Engineer
Company websitefigure.ai (Figure, opens in new tab)
Base salary $150K – $220K
Employer-published annual base salary, USD. Advertised base range in San Jose, CA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationSan Jose, CA
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (5 h ago) · observed since
About this job
Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA.
We are looking for a Thermal Analysis Engineer to simulate and analyze our robots thermal performance and design thermal management systems.
Responsibilities:
- Build a thermal model of our actuators, battery, sensors, computers, and other key components.
- Simulate kinematic use cases on the thermal model and determine where thermal mitigations are necessary.
- Generate and execute test plans to demonstrate the necessity and effectiveness of your thermal management designs.
- Inspect first articles, build test stands, and continuously support parts on robot development platforms.
- Work cross-functionally with subsystem owners of to integrate the thermal management system into the robot.
Requirements:
- 5+ years of experience in mechanical engineering, 2+ years explicit experience in thermal modeling.
- Bachelor’s or Master’s Degree in Mechanical, Robotics, Mechatronics, or similar field.
- Experienced in using 3D CAD software to design parts with complex geometry.
- Experience designing and building prototypes.
- Experienced with simulation and analysis methodology and software (ANSYS, COMSOL, MATLAB, etc).
- Ability to write and maintain clean documentation for your design process.
Bonus Qualifications:
- Experience with high volume manufacturing processes.
- Experience working with contract manufacturers.
- Experience creating 3D CAD models, especially in CATIA V6.
- Experience with textiles.
The US base salary range for this full-time position is $150,000 to $220,000 per year.
The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.
Source: Figure on Greenhouse · View original posting (opens in new tab)
How this pay compares
Base floor $150,000, above 56% of the 3,310 Engineering (non-software) roles in California on this site. The employer's range is $70,000 wide, 47% of the floor. Observed open for 8 days so far (since Nov 12, 2026).
Pay in context
Among 3,310 Engineering (non-software) roles in California listed on this site, the median base floor is $146,000 and the middle half runs from $124,000 to $170,000. This role's floor ($150,000) is above 56% of them; 91 others list the same floor.
Base floors of 3,310 Engineering (non-software) roles in California
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 26.2% | 868 |
| $125K to $150K | 29.9% | 991 |
| $150K to $175K | 21.3% | 706 |
| $175K to $200K | 11.2% | 372 |
| $200K to $225K | 6.3% | 209 |
| $225K to $250K | 2.1% | 70 |
| $250K to $275K | 1.7% | 55 |
| $275K and up | 1.2% | 39 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 3,310 open postings with this job family in California
- Sample size
- 3310
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-21
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 21, 2026.
State against nationwide
Median base floor in California vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), California | $146K | 3,310 |
| Engineering (non-software), all states | $136K | 7,594 |
| This job's base floor (marked) | $150K |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 3310 in California; 7594 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-21
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Figure pays
12 of Figure's 47 live roles on this site list a higher base floor and 18 list a lower one. Across them the median floor is $150,000; the middle half runs from $125,000 to $155,000.
Base floors of Figure's 47 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 23.4% | 11 |
| $125K to $150K | 14.9% | 7 |
| $150K to $175K | 42.6% | 20 |
| $175K to $200K | 4.3% | 2 |
| $200K to $225K | 14.9% | 7 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 47 open public roles at this employer
- Sample size
- 47
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in California with the nearest published base floor to $150,000, one per employer.
- Design Verification Engineer - Internal IP Etched · base floor $150,000
- Sr. Electrical Engineer, Lasercom Observable Space · base floor $150,000
- Optical Engineer, Precision Instrumentation Astera · base floor $150,000
- Principal Engineer Curtiss-Wright · base floor $150,000
- CAD Sculptor 1X · base floor $150,000
This listingThermal Analysis Engineer$150K – $220K
PCB Layout Designer$150K – $250K
Robot Operations Manager$150K – $190K
State Estimation Engineer, Data Collection Systems$150K – $300K
Systems Integration Engineer - Actuation Systems$150K – $250K
Manufacturing Quality Engineer BotQ$150K – $250K
Security Engineer, Enterprise Security$150K – $250K
Chart as a table
| Role | Published base |
|---|---|
| Thermal Analysis Engineer (this listing) | $150K - $220K |
| PCB Layout Designer | $150K - $250K |
| Robot Operations Manager | $150K - $190K |
| State Estimation Engineer, Data Collection Systems | $150K - $300K |
| Systems Integration Engineer - Actuation Systems | $150K - $250K |
| Manufacturing Quality Engineer BotQ | $150K - $250K |
| Security Engineer, Enterprise Security | $150K - $250K |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 12, 2026 (8 days ago).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-11-12
Where this pay comes from
Location as the employer wrote it: San Jose, CA
The US base salary range for this full-time position is $150,000 to $220,000 per year.
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
