Six Figure Work

Manufacturing Engineer II

Crane Company

Company websitecraneae.com (Crane Company, opens in new tab)

Base salary $103,892 – $122,678

Employer-published annual base salary, USD. Advertised base range in Burbank, CA

Apply (opens in new tab)

You apply on the employer's own site. Six Figure Work does not handle applications.

  • LocationBurbank, CA
  • WorkplaceOn-site
  • Status at last checkSource accepting applications when checked
  • Last checked (7 h ago) · observed since

About this job

Crane Aerospace and Electronics has an exciting opportunity for a Manufacruring Engineer II at our Burbank, CA location.

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).


Every 1.2 seconds, product built at our Crane Aerospace & Electronics Burbank facility is stopping aircraft – delivering passengers and military personnel safely to their destination. Home to our Landing & Cabin Systems team, Crane A&E’s brake control systems and premium cabin actuation solutions are flying on tens of thousands of aircraft throughout the world. You’ll join a business with a long track record of engineering excellence, set in the wonderful town of Burbank filled with great community atmosphere, schools, weather and no shortage of entertainment. Start the next chapter of your career with Crane Aerospace & Electronics!


Job Summary:

The Manufacturing Engineer II performs independent assignments to develop and recommend improvements in the Manufacturing system and in product manufacturability and cost effectiveness. 


  • Study, analyze and design methods, procedures, processes, layouts, flow, fixtures and tooling as needed to support production 
  • Investigate, recommend, and implement manufacturing cost reduction and product improvement programs 
  • Identify root cause and corrective actions for manufacturing problems 
  • Participate in customer specification and statement of work reviews 
  • Participate in the review and evaluation of new product designs or design changes 
  • Review and analyze design change requests initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and to verify justification for change 
  • Evaluate, test and select facilities, equipment and materials required for production in conjunction with Production Supervisors, Purchasing and other groups 
  • Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions 
  • Develop manufacturing operating instructions 
  • Develop and track manufacturing metrics to monitor the health of processes 
  • Evaluate non-conformances as part of the Material Review Board 
  • Direct work activities of production operators to aid in problem solving 
  • Develop procedures and train assemblers and operators in machine operations, processes or assembly applications 
  • Coordinate with vendors and customers 
  • Identify and prioritize work with limited input from manager 
  • Develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements 
  • Any other task assigned by supervisor or management 

Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).


Minimum Qualifications:

  • Experience: 2+ years of experience as a Manufacturing Engineer
  • Knowledge: Practical application knowledge of the theories of modern production principles and methods as applied to a high technology electronics design and manufacturing operation; Basic knowledge of material characteristics and processing, chemicals; Basic concepts of electrical systems, mechanical systems, fluids, and heat transfer
  • Skills/Abilities: Able to effectively communicate with employees at all levels of the organization
  • Education/Certification: BA or BS degree in Mechanical Engineering, Electrical Engineering, Chemical Engineering, Material Science or related field

 

Preferred Qualifications:

  • Experience in a regulated manufacturing environment

 

Working Conditions:

  • Working conditions are normal for a manufacturing environment
  • Manufacturing operations may require the use of safety equipment to include but not limited to eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
  • May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
  • Must be available to work overtime, as needed
  • Flexible work schedule to support production

Standing: up to 100% *percentage is approximate and may vary depending on work task

Sitting: up to 75% *percentage is approximate and may vary depending on work task

Lifting (in pounds): up to 25 pounds

Pushing (in pounds): up to 50 pounds

Mental/Visual: use of microscope and computer

Workspace: cubicle/desk


Top Benefits:

As a team member at Crane Aerospace and Electronics, you’ll enjoy:

Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month

Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.

401k Retirement Plan: 401k plan with company match

Education Reimbursement: eligible after 6 months of employment

​

You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and great opportunities.

We are committed to operational excellence and world class processes.  We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check.  FAA sensitive positions require employees to participate in a random drug test pool.

#LI-SP #CAE


Salary range: $103,891.70 - $122,678.30. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. 


This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Source: Crane Company on Workday · View original posting (opens in new tab)

How this pay compares

Base floor $103,892, above 7% of the 3,310 Engineering (non-software) roles in California on this site; the other 93% list the same floor or a higher one. The employer's range is $18,787 wide, 18% of the floor. Observed open for 9 days so far (since Nov 11, 2026).

Pay in context

Among 3,310 Engineering (non-software) roles in California listed on this site, the median base floor is $146,000 and the middle half runs from $124,000 to $170,000. This role's floor ($103,892) is above 7% of them.

Base floors of 3,310 Engineering (non-software) roles in California

Base floors of 3,310 Engineering (non-software) roles in California$100K to $125K: 26.0% (862); $125K to $150K: 30.1% (997); $150K to $175K: 21.1% (700); $175K to $200K: 11.4% (377); $200K to $225K: 6.3% (208); $225K to $250K: 2.1% (70); $250K to $275K: 1.7% (56); $275K and up: 1.2% (40)0%10%20%30%40%26%10030%12521%15011%1756%2002%2252%2501%275This job $104K
Each bar counts postings on this site by published base floor, in $K. The marker is this job's floor.
Table
Base floors of 3,310 Engineering (non-software) roles in California
Floor bandSharePostings
$100K to $125K26.0%862
$125K to $150K30.1%997
$150K to $175K21.1%700
$175K to $200K11.4%377
$200K to $225K6.3%208
$225K to $250K2.1%70
$250K to $275K1.7%56
$275K and up1.2%40
How this is calculated
Statistic
Base floor distribution of the cohort
Formula
count of cohort postings in each $25K band of published base floor / postings in the cohort
Denominator
3,310 open postings with this job family in California
Sample size
3310
Hidden when
the cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.

State against nationwide

Median base floor in California vs nationwide

Median published base floor of the same job family, in this state and across all states, next to this job's floor.
Table
Median base floor in California vs nationwide
Valuepostings
Engineering (non-software), California$146K3,310
Engineering (non-software), all states$136K7,612
This job's base floor (marked)$103,892
How this is calculated
Statistic
Median floor, state vs nationwide
Formula
median published base floor of each cohort
Denominator
open postings of this job family
Sample size
3310 in California; 7612 nationwide
Hidden when
either cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

How Crane Company pays

34 of Crane Company's 39 live roles on this site list a higher base floor and 4 list a lower one. Across them the median floor is $127,216; the middle half runs from $118,000 to $141,728.

Base floors of Crane Company's 39 live roles

Base floors of Crane Company's 39 live roles$100K to $125K: 38.5% (15); $125K to $150K: 48.7% (19); $150K to $175K: 10.3% (4); $175K to $200K: 2.6% (1)0%15%30%45%38%10049%12510%1503%175This job $104K
Each bar counts this employer's live roles by published base floor, in $K. The marker is this job's floor.
Table
Base floors of Crane Company's 39 live roles
Floor bandShareRoles
$100K to $125K38.5%15
$125K to $150K48.7%19
$150K to $175K10.3%4
$175K to $200K2.6%1
How this is calculated
Statistic
Employer base floor distribution
Formula
count of the employer's open roles in each $25K band of published base floor / its open roles
Denominator
39 open public roles at this employer
Sample size
39
Hidden when
this employer has fewer than 5 roles
Calculation version
jobpage-analysis-v1
Data as of
current
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Similar pay elsewhere

Other employers' Engineering (non-software) roles in California with the nearest published base floor to $103,892, one per employer.

This range next to 6 other live Crane Company roles with the nearest advertised base floor
Chart as a table
This range next to 6 other live Crane Company roles with the nearest advertised base floor
RolePublished base
Manufacturing Engineer II (this listing)$103,892 - $122,678
Production Supervisor II (Electronic Assembly )$104,000 - $135,900
Production Supervisor II$103,209 - $133,785
Electrical Engineer II$102,160 - $119,331
Electrical Engineer II$102,160 - $119,331
Manufacturing Engineer II$100K - $117K
Quality Engineer III$114,018 - $134,207

Same $100K to $400K scale as every card. All Crane Company roles · How to read the bar

Observed changes

No changes to the pay or listing since we first observed this role on Nov 11, 2026 (9 days ago).

  1. First observed on the employer's board, already publishing a qualifying base salary
Observed since
Employer-stated posting date
2026-11-10
Where this pay comes from

Location as the employer wrote it: Burbank, California

Salary range: $103,891.70 - $122,678.30. Several factors contribute to actual salary, including exp

Method
Employer text, read with fixed rules and re-verified
Checked
Rule set
us-base-v2

The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.

What we verified

  • The pay figures come from the employer's own listing, quoted exactly above.
  • The pay is an annual base salary in US dollars with a minimum of at least $100,000.
  • The role was publicly listed on the employer's job board when last checked.

We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.

Get Six Figure Work by email

Pick what you want. Nothing is selected for you unless it matches the page you are on, and nothing is sent until you confirm from a link we email you.

What would you like to receive?

A short weekly note on what employer-published pay data shows: who pays what, where, and what is changing. Once a week.

Practical notes for job seekers: interviewing, applying for six-figure roles, and making an upward move. About twice a month.

New jobs that match a search you choose. Every job listed has an employer-published base salary of $100,000 or more. At most one email a day (or weekly, your choice). Nothing is sent on days with no new matches. Alerts cover every new job, because this page has no filters.

We email you only after you confirm from a link we send to this address. We do not sell or share your address. Every email has a one-click unsubscribe link. How we handle your email.