Six Figure Work

Modeling & Simulation Engineer III

Oshkosh Corporation

Company websiteoshkoshcorp.com (Oshkosh Corporation, opens in new tab)

Base salary $104,100 – $173,900

Employer-published annual base salary, USD. Advertised base range in Huntersville, NC

Apply (opens in new tab)

You apply on the employer's own site. Six Figure Work does not handle applications.

  • LocationHuntersville, NC
  • WorkplaceWorkplace not stated
  • Status at last checkSource accepting applications when checked
  • Last checked (56 min ago) · observed since

About this job

About Pratt Miller, an Oshkosh company

Pratt Miller is a product development company in motorsports, defense, and mobility industries providing clients with product engineering and low-volume production solutions. Our range of research & development, engineering, prototype manufacturing, test & validation, and low-rate production capability help our customers bring their high-quality products to market faster.

The Modeling and Simulation Engineer III will support product development through the integration of simulation tools. This role will define and validate system-level requirements of mechanical systems, develop and execute simulation plans, correlate virtual models with physical test data, and assess system performance against program objectives.


ESSENTIAL FUNCTIONS AND SKILLS: Typical responsibilities include but are not limited to the following:


  • Lead development and performance analysis of programs using virtual analysis workflows and co-simulation tools to meet technical requirements and program timing.
  • Drive innovation in virtual simulation tools and methods.
  • Architect, develop and execute virtual models capable of integrating hardware and software for a wide variety of mechanical systems.
  • Develop and integrate multi-physics simulation tools (multi-body dynamics, 1-D hydraulics, controls, etc) to calibrate and validate software and hardware.
  • Create and deploy functional mock-up units, FMUs, and other reduced-order or interface models for use by cross-functional teams.
  • Develop durability requirements, load cases, acceptance criteria, and verification plans for components and systems.
  • Build, run, and correlate rigid and flexible multibody dynamics models to predict loads, damage, motions, and other performance metrics.
  • Work cross-functionally with design, test, materials, and systems teams to improve durability performance and close gaps between requirements, analysis, and validation.
  • Document assumptions, methods, correlation results, and engineering recommendations.
  • Generate clear, concise technical reports and effectively communicate findings to internal teams and customers
  • Operate effectively in a dynamic, fast-paced environment while driving progress across multidisciplinary teams

ADDITIONAL REQUIREMENTS: In addition to the responsibilities mentioned above, tasks relating to the following area will be assigned as required.


  • Ability to work effectively in a collaborative, team-oriented environment
  • Strong time management and organizational skills
  • Effective communication across multiple platforms (Microsoft Teams, email, phone, messaging)
  • Reliable transportation and consistent attendance
  • Demonstrated strong work ethic and accountability for deliverables
  • Commitment to quality and continuous improvement

EDUCATION/CERTIFICATION/YEARS OF EXPERIENCE:

  • Bachelor’s or Master’s degree in Mechanical Engineering or related field.
  • 5+ years of experience with simulation tools and co-simulation.

SPECIALIZED SKILLS AND KNOWLEDGE:

  • Hands-on experience with one or more MBD tools such as Adams, MotionSolve, Simscape Multibody, Simpack, or equivalent.
  • Working knowledge of 1-D simulation tools (Simscape, Dymola, AmeSim)
  • Proficiency in Python, C++, CLI or similar tools
  • Understanding of control systems.
  • Experience with Matlab and Simulink
  • Knowledge of Desing of Experiments (DOE) methods, and data interpretation.
  • Ability to process and analyze test data using signal-processing techniques.
  • Knowledge of data acquisition (DAQ) systems and mechanical system instrumentation.
  • Capability to work independently with limited supervision
  • Demonstrated ability to identify and recommend improvements to engineering processes and workflows
  • Strong analytical thinking and problem-solving skills

PHYSICAL DEMANDS:

  • Up to 20% travel required (domestic and international)
  • Hands-on involvement with test hardware, including installation and adjustments in shop or wind tunnel environments
  • Ability to lift and move components or equipment up to 50 lbs.

EXPECTED HOURS OF WORK:

  • Typical start time between 7:00 AM – 8:00 AM, Monday through Friday
  • Flexibility required to meet project deadlines, including occasional weekend work

Pay Range:

$104,100.00 - $173,900.00

The above pay range reflects the minimum and maximum target pay for the position across all U.S. locations. Within this range, individual pay is determined by various factors, including the scope and responsibilities of the role, the candidate's experience, education and skills, as well as the equity of pay among team members in similar positions. Beyond offering a competitive total rewards package, we prioritize a people-first culture and offer various opportunities to support team member growth and success.

Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team by email [email protected].

Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To the extent that information is provided or collected regarding categories as provided by law it will in no way affect the decision regarding an employment application.

Oshkosh Corporation will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information.

Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, lawful permanent resident, or an individual who has been admitted as a refugee or granted asylum.

Source: Oshkosh Corporation on Workday · View original posting (opens in new tab)

How this pay compares

Base floor $104,100. The employer's range is $69,800 wide, 67% of the floor. Observed open for 2 days so far (since Nov 18, 2026).

How Oshkosh Corporation pays

15 of Oshkosh Corporation's 36 live roles on this site list a higher base floor and 14 list a lower one. Across them the median floor is $104,100; the middle half runs from $103,300 to $118,700.

Base floors of Oshkosh Corporation's 36 live roles

Base floors of Oshkosh Corporation's 36 live roles$100K to $125K: 88.9% (32); $125K to $150K: 5.6% (2); $150K to $175K: 2.8% (1); $175K to $200K: 2.8% (1)0%25%50%75%100%89%1006%1253%1503%175This job $104K
Each bar counts this employer's live roles by published base floor, in $K. The marker is this job's floor.
Table
Base floors of Oshkosh Corporation's 36 live roles
Floor bandShareRoles
$100K to $125K88.9%32
$125K to $150K5.6%2
$150K to $175K2.8%1
$175K to $200K2.8%1
How this is calculated
Statistic
Employer base floor distribution
Formula
count of the employer's open roles in each $25K band of published base floor / its open roles
Denominator
36 open public roles at this employer
Sample size
36
Hidden when
this employer has fewer than 5 roles
Calculation version
jobpage-analysis-v1
Data as of
current
Employer set
Open jobs on this site that publish a base salary of $100,000 or more
This range next to 6 other live Oshkosh Corporation roles with the nearest advertised base floor
Chart as a table
This range next to 6 other live Oshkosh Corporation roles with the nearest advertised base floor
RolePublished base
Modeling & Simulation Engineer III (this listing)$104,100 - $173,900
Sr. Principal Engineer - Vision Intelligence$104,100 - $173,900
Modern Controls Engineer - Principal$104,100 - $173,900
Sr. Principal Engineer - Autonomy$104,100 - $173,900
Controls Engineer Team Lead$104,100 - $173,900
Sr. Principal Embedded Software Engineer$104,100 - $173,900
Sr. Principal Engineer - Controls$104,100 - $173,900

Same $100K to $400K scale as every card. All Oshkosh Corporation roles · How to read the bar

Observed changes

No changes to the pay or listing since we first observed this role on Nov 18, 2026 (2 days ago).

  1. First observed on the employer's board, already publishing a qualifying base salary
Observed since
Employer-stated posting date
2026-11-17
Where this pay comes from

Location as the employer wrote it: Huntersville, North Carolina, United States

$104,100.00 - $173,900.00

Method
Employer text, read with fixed rules and re-verified
Checked
Rule set
us-base-v2

The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.

What we verified

  • The pay figures come from the employer's own listing, quoted exactly above.
  • The pay is an annual base salary in US dollars with a minimum of at least $100,000.
  • The role was publicly listed on the employer's job board when last checked.

We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.

Get Six Figure Work by email

Pick what you want. Nothing is selected for you unless it matches the page you are on, and nothing is sent until you confirm from a link we email you.

What would you like to receive?

A short weekly note on what employer-published pay data shows: who pays what, where, and what is changing. Once a week.

Practical notes for job seekers: interviewing, applying for six-figure roles, and making an upward move. About twice a month.

New jobs that match a search you choose. Every job listed has an employer-published base salary of $100,000 or more. At most one email a day (or weekly, your choice). Nothing is sent on days with no new matches. Alerts cover every new job, because this page has no filters.

We email you only after you confirm from a link we send to this address. We do not sell or share your address. Every email has a one-click unsubscribe link. How we handle your email.