Six Figure Work

Senior Manufacturing Engineer - Component Manufacturing

Antora Energy

Company websiteantora.com (Antora Energy, opens in new tab)

Base salary $145K – $170K

Employer-published annual base salary, USD. Advertised base range in San Jose, CA

Apply (opens in new tab)

You apply on the employer's own site. Six Figure Work does not handle applications.

  • LocationSan Jose, CA
  • WorkplaceWorkplace not stated
  • Status at last checkSource accepting applications when checked
  • Last checked (1 h ago) · observed since

About this job

Antora Energy delivers affordable, reliable energy to industry, data centers, and the grid. Our thermal batteries turn low-cost electricity into always-on heat and power, without supply-constrained critical minerals or multi-year construction timelines.

We are growing our company with people who put team and mission first, value connection through laughter and joy, and work with humility and openness. We are committed to building a diverse, passionate, and creative team dedicated to a future powered by abundant, clean, low-cost energy.

 

 

Position Summary

Antora builds the most critical components of its thermal batteries in-house, starting with the machining of our proprietary rigid insulation. We are looking for a senior manufacturing engineer to own that machining line as a production process.

The line is being built now. You will join during installation and commissioning, work alongside the engineer leading the build, and then take ownership: stabilize it, industrialize it, and scale it. You will own the process, review the CNC programs, drive yield and capacity, and cut new part sets as our product evolves. You will help define and then build the line's next home as we open a new facility. As the line matures, you will have the opportunity to support next-generation process development and other in-house manufacturing efforts. The company is moving fast and priorities will shift, so the scope will shift too, and the insulation machining line stays your anchor.

You need to have owned a production process, ideally in a machining or panel-processing environment, improved it with data, and shown that you can learn a new one from scratch.

Roles & Responsibilities

  • Own and stabilize the line 

    • Commission production equipment and transfer the pilot process onto it
    • Bring the line into our production systems: released part numbers, process plans, work orders, and traceability from raw material to finished part
    • Own machining process performance, validation, and controlled release of CNC programs. Partner with the machinists and programmers who develop and maintain the programs: review machining strategy, tooling, workholding, and process parameters, troubleshoot, and provide hands-on programming support as needed. Shop leadership remains responsible for daily production operations.

    Industrialize and improve

    • Establish and report baselines for yield, material utilization, cycle time, and equipment availability
    • Lead structured problem solving on the top loss drivers, from containment to permanent corrective action
    • Work with quality and supply chain on incoming material inspection and specification
    • Improve handling, fixturing, and dust control to raise yield and uptime
    • Write the standard work and training that let technicians run every station
    • Improve safety and ergonomics in partnership with production and EH&S, and design in systems that ensure operator safety during machining, handling, and transportation of material and parts
    • Design material flow from receiving through machining to kitted parts, working with logistics and inventory on part numbering, labeling, traceability, and kitting, so each module’s parts reach the build complete and in sequence

    Introduce new parts and scale the line 

    • Turn each new part set from engineering into a stable machining process, in conjunction with the machinists: programming support, fixturing, validation, and cutover
    • Build the capacity model, identify the constraints, and remove them
    • Replicate the line or specify new equipment to run at scale, including factory layout, material flow, and acceptance testing
    • Contribute requirements to the new facility, then lead installation, commissioning, and process transfer there, handing off to the local team with training, documentation, and a bounded open-issues list
    • Give design engineers manufacturability feedback from the floor

    Flex to where the company needs you

    • Support next-generation process development and other in-house manufacturing efforts as they mature
    • Take on new scope as priorities shift, with the insulation machining line remaining your primary responsibility

    Contribute to Antora's culture

    • Put team and mission first
    • Invite critique early and treat feedback as material that strengthens the work
    • Be someone technicians and engineers want building next to them

 

Key Qualifications

    • Bachelor's degree in Mechanical, Manufacturing, Materials, or Industrial Engineering, or equivalent practical experience
    • 3+ years of manufacturing or process engineering in a production environment, with direct ownership of a process's or line's performance
    • A record of improving a production process with measured results: yield, scrap, cycle time, capacity, or availability you can show you moved
    • Hands-on CNC machining and CAM experience: you can read, validate, and edit toolpaths, including software-generated ones, and challenge feeds, speeds, tooling, and workholding against takt and process needs
    • Direct responsibility for meaningful production launch or scaling deliverables, such as a capacity model, an equipment specification, an acceptance test, layout input, or a commissioning punch list taken to sign-off
    • Demonstrated ability to learn an unfamiliar process or material quickly and reason about it from first principles
    • Structured problem solving applied to real production issues: root cause analysis, designed experiments, and process capability
    • Experience with 3D CAD
    • Effective on the floor with technicians, a strong cross-functional collaborator, and comfortable when priorities change
    • Experience releasing and maintaining process plans, work instructions, and engineering changes in manufacturing systems, with appropriate revision control and material traceability
    • Ability to travel domestically as needed. Domestic travel is expected to reach approximately 25% on average, with extended onsite periods during installation and commissioning.

 

Additional Qualifications Desired

  • Panel processing on routers, saws, or sanders, such as casework, composites, foam, stone, or other brittle or abrasive materials
  • Specifying and running large dust collection for a machining operation
  • Operating, tooling, or commissioning presses and forming equipment
  • Moving a process from R&D or a pilot cell into production
  • Launching or replicating a production line in a new facility and handing it to a local team
  • Working with a material supplier on incoming quality and specification
  • Designing material flow, kitting, or part traceability for a build with many part numbers
  • Scripting or automation of CAM, tracking, or reporting work, including with AI tools
  • Lean or Six Sigma training

Work Location:  Onsite - San Jose, CA

Salary Range:  $145,000 USD - $170,000 USD

Salary Basis:  Annual

Please note that the salary range listed above reflects Antora Energy's estimated pay for this position. The actual salary offered will be within the posted range and determined based on several factors including but not limited to a candidate's experiences, credentials and expertise, as they pertain to the position's requirements.

In addition to a competitive base salary, Antora Energy’s Total Rewards program includes equity compensation in the form of stock options, a premium health benefits package with life and disability insurance, a 401K plan with employer contributions, flexible spending accounts, and an industry leading paid-time-off policy that features flexible and inclusive holiday observance, as well as paid volunteer time off.

#LI-Onsite

 When it comes to stopping climate change, we need everyone. We believe that having a diversity of backgrounds and experiences strengthens all of us, and we strive to create an environment where every one of us is empowered to create meaningful change.

Source: Antora Energy on Greenhouse · View original posting (opens in new tab)

How this pay compares

Base floor $145,000. The employer's range is $25,000 wide, 17% of the floor. First observed today.

How Antora Energy pays

19 of Antora Energy's 33 live roles on this site list a higher base floor and 13 list a lower one. Across them the median floor is $154,000; the middle half runs from $138,000 to $171,000.

Base floors of Antora Energy's 33 live roles

Base floors of Antora Energy's 33 live roles$100K to $125K: 9.1% (3); $125K to $150K: 36.4% (12); $150K to $175K: 30.3% (10); $175K to $200K: 9.1% (3); $200K to $225K: 6.1% (2); $225K to $250K: 3.0% (1); $250K to $275K: 6.1% (2)0%10%20%30%40%9%10036%12530%1509%1756%2003%2256%250This job $145K
Each bar counts this employer's live roles by published base floor, in $K. The marker is this job's floor.
Table
Base floors of Antora Energy's 33 live roles
Floor bandShareRoles
$100K to $125K9.1%3
$125K to $150K36.4%12
$150K to $175K30.3%10
$175K to $200K9.1%3
$200K to $225K6.1%2
$225K to $250K3.0%1
$250K to $275K6.1%2
How this is calculated
Statistic
Employer base floor distribution
Formula
count of the employer's open roles in each $25K band of published base floor / its open roles
Denominator
33 open public roles at this employer
Sample size
33
Hidden when
this employer has fewer than 5 roles
Calculation version
jobpage-analysis-v1
Data as of
current
Employer set
Open jobs on this site that publish a base salary of $100,000 or more
This range next to 6 other live Antora Energy roles with the nearest advertised base floor
Chart as a table
This range next to 6 other live Antora Energy roles with the nearest advertised base floor
RolePublished base
Senior Manufacturing Engineer - Component Manufacturing (this listing)$145K - $170K
Strategic Finance Manager$148K - $173K
Product Manager$142K - $170K
Senior Mechanical Design Engineer, Tooling & Factory Equipment$142K - $190K
Sr. Business Development Analyst - International$140K - $190K
Technical Program Manager$138K - $190K
Projects Control Engineer$138K - $165K

Same $100K to $400K scale as every card. All Antora Energy roles · How to read the bar

Observed changes

No changes to the pay or listing since we first observed this role on Nov 20, 2026 (today).

  1. First observed on the employer's board, already publishing a qualifying base salary
Observed since
Employer-stated posting date
2026-11-20
Where this pay comes from

Location as the employer wrote it: San Jose, CA

Salary Range: $145,000 USD - $170,000 USD

Method
Employer text, read with fixed rules and re-verified
Checked
Rule set
us-base-v2

The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.

What we verified

  • The pay figures come from the employer's own listing, quoted exactly above.
  • The pay is an annual base salary in US dollars with a minimum of at least $100,000.
  • The role was publicly listed on the employer's job board when last checked.

We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.

Get Six Figure Work by email

Pick what you want. Nothing is selected for you unless it matches the page you are on, and nothing is sent until you confirm from a link we email you.

What would you like to receive?

A short weekly note on what employer-published pay data shows: who pays what, where, and what is changing. Once a week.

Practical notes for job seekers: interviewing, applying for six-figure roles, and making an upward move. About twice a month.

New jobs that match a search you choose. Every job listed has an employer-published base salary of $100,000 or more. At most one email a day (or weekly, your choice). Nothing is sent on days with no new matches. Alerts cover every new job, because this page has no filters.

We email you only after you confirm from a link we send to this address. We do not sell or share your address. Every email has a one-click unsubscribe link. How we handle your email.