Staff Manufacturing Engineer
Company websitestryker.com (Stryker, opens in new tab)
Base salary $107,200 – $178,600
Employer-published annual base salary, USD. Advertised base range in Waltham, MA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationWaltham, MA
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (11 h ago) · observed since Last checked 11 h ago. We could not reach the employer's site, so this listing may have closed. Check the employer's page before you apply.
About this job
The Senior Manufacturing Engineer partners across functions to drive process improvements, resolve technical challenges, and support the successful introduction of new and existing products into production.
What You Will Do
- Lead manufacturing engineering projects, track milestones, communicate project status, and drive timely resolution of technical and operational issues.
- Support and improve manufacturing processes using statistical methods, Lean Manufacturing, Six Sigma, and Good Manufacturing Practice (GMP) principles.
- Transfer new products, design changes, and product line extensions into production through structured validation and implementation activities.
- Troubleshoot manufacturing, tooling, fixture, and equipment issues to identify root causes and implement sustainable corrective actions.
- Design, procure, install, and qualify production fixtures, equipment, and tools through IQ/OQ/PQ protocols to improve efficiency, safety, and product quality.
- Conduct failure analyses and implement design or process improvements to enhance product functionality, performance, and manufacturability.
- Identify and execute process improvement initiatives that reduce scrap, improve yield, increase throughput, and optimize production line performance.
- Develop technical protocols, reports, standard operating procedures, visual work instructions, and training programs; deliver training for new product launches and process changes.
What You Will Need
Required Qualifications
- Bachelor's degree in Engineering; Mechanical, Electrical, Biomedical, Manufacturing, or Industrial Engineering preferred.
- Minimum 4 years of engineering experience in manufacturing, process engineering, or a related technical environment.
Preferred Qualifications
- Certification and/or experience applying Lean Manufacturing, Six Sigma, or continuous improvement methodologies in a production environment.
- Experience with Engineering Change Orders (ECOs), change justification documentation, and assembly procedure change management.
- Experience in a highly regulated manufacturing environment, such as medical device, pharmaceutical, or other regulated industries.
- Experience planning and managing engineering projects using project management tools and methodologies (e.g., Gantt charts, PERT charts).
$107,200 - $178,600 USD Annual
Travel Percentage: 10%Stryker Corporation is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status. Stryker is an EO employer – M/F/Veteran/Disability.Stryker Corporation will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.
Source: Stryker on Workday · View original posting (opens in new tab)
How this pay compares
Base floor $107,200, above 10% of the 440 Engineering (non-software) roles in Massachusetts on this site; the other 90% list the same floor or a higher one. The employer's range is $71,400 wide, 67% of the floor. Observed open for 2 days so far (since Nov 18, 2026).
Pay in context
Among 440 Engineering (non-software) roles in Massachusetts listed on this site, the median base floor is $131,643 and the middle half runs from $116,813 to $150,000. This role's floor ($107,200) is above 10% of them; 2 others list the same floor.
Base floors of 440 Engineering (non-software) roles in Massachusetts
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 36.8% | 162 |
| $125K to $150K | 36.6% | 161 |
| $150K to $175K | 15.0% | 66 |
| $175K to $200K | 8.0% | 35 |
| $200K to $225K | 3.2% | 14 |
| $225K to $250K | 0.5% | 2 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 440 open postings with this job family in Massachusetts
- Sample size
- 440
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.
State against nationwide
Median base floor in Massachusetts vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), Massachusetts | $131,643 | 440 |
| Engineering (non-software), all states | $136K | 7,614 |
| This job's base floor (marked) | $107,200 |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 440 in Massachusetts; 7614 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Stryker pays
51 of Stryker's 86 live roles on this site list a higher base floor and 29 list a lower one. Across them the median floor is $118,000; the middle half runs from $102,600 to $133,400.
Base floors of Stryker's 86 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 67.4% | 58 |
| $125K to $150K | 22.1% | 19 |
| $150K to $175K | 10.5% | 9 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 86 open public roles at this employer
- Sample size
- 86
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in Massachusetts with the nearest published base floor to $107,200, one per employer.
- Lead, Thin Film Coatings Manufacturing Engineer Entegris · base floor $107,000
- Principal R&D Engineer Cardinal Health · base floor $107,900
- Electrical Engineer III Applied Materials · base floor $108,000
- Regional Tenant Improvement Superintendent ARCO Companies · base floor $108,000
- Regional Tenant Improvement Superintendent ARCO National Holdings · base floor $108,000
This listingStaff Manufacturing Engineer$107,200 – $178,600
Portfolio Manager (Hybrid)$107,200 – $178,600
Portfolio Manager - Knee - Hybrid$107,200 – $178,600
Portfolio Manager- Foot and Ankle$107,200 – $178,600
Staff R&D Engineer$107,200 – $178,600
Staff Mechanical Engineer, R&D$107,200 – $178,600
Staff Test Engineer$102,700 – $171,100
Chart as a table
| Role | Published base |
|---|---|
| Staff Manufacturing Engineer (this listing) | $107,200 - $178,600 |
| Portfolio Manager (Hybrid) | $107,200 - $178,600 |
| Portfolio Manager - Knee - Hybrid | $107,200 - $178,600 |
| Portfolio Manager- Foot and Ankle | $107,200 - $178,600 |
| Staff R&D Engineer | $107,200 - $178,600 |
| Staff Mechanical Engineer, R&D | $107,200 - $178,600 |
| Staff Test Engineer | $102,700 - $171,100 |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 18, 2026 (2 days ago).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-11-16
Where this pay comes from
Location as the employer wrote it: Waltham, Massachusetts
$107,200 - $178,600 USD Annual
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
