Staff Propulsion Engineer, Combustion Devices, Liquids
Company websiteursamajor.com (Ursa Major, opens in new tab)
Base salary $155K – $193K
Employer-published annual base salary, USD. Advertised base range in Berthoud, CO
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationBerthoud, CO
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (7 h ago) · observed since
About this job
The future of aerospace and defense starts here.
Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands.
Our products and technologies require an extraordinary team. A team that will mold the technologies of tomorrow while delivering today’s best. We are an intrinsically motivated team that has a passion for solving problems and empowering each other every day to develop our skills knowing that there is always room for growth.
As a Staff Propulsion Engineer for Combustion Devices you are an advanced technical leader and a primary owner for combustion hardware across one or more engine programs. You will lead clean sheet design development and validation of combustion devices such as injectors chambers nozzles preburners and ignition systems. You will drive architecture and trade studies for combustion devices solve the most challenging technical problems refine standards and best practices and mentor other engineers. You will own hardware and technical roadmaps from concept through qualification and production support and will often support multiple engines or product lines at once.
Responsibilities
- Lead clean sheet design and development of combustion devices including main injectors, preburner injectors, combustion chambers, nozzles, and ignition systems and integrate these into the engine system
- Own combustion device hardware through the full lifecycle including concept design, detailed design, build, test, qualification, production support, and fielded hardware issue resolution
- Lead performance modeling and analysis for combustion devices including injector and chamber sizing combustor performance models and stability evaluation and maintain and improve these models over time
- Define and conduct trade studies for engine and combustion architecture options and provide clear recommendations on configuration performance cost risk and manufacturability
- Develop and improve standards work instructions design guides and acceptance and qualification test approaches for combustion devices and ensure consistent application across programs
- Lead root cause investigations for combustion device issues in test or production and drive implementation of durable corrective actions in design process and test
- Plan and oversee development and qualification test campaigns for combustion devices and work closely with test and analysis teams to interpret data and update designs and models
- Collaborate closely with systems analysis materials manufacturing and test teams to reduce variation improve reliability and enable efficient production of combustion hardware
- Mentor and train junior and senior engineers in combustion device design analysis test and development practices and lead design reviews and technical deep dives
- Collaborate closely with manufacturing and printing to establish guideline, standards, and requirements for manufacturing quality, repeatability, and qualification
Required Qualifications
- Bachelor degree in Mechanical Aerospace or related Engineering field Master preferred
- 8 plus years of experience in propulsion or mechanical design roles with significant time focused on liquid rocket engine combustion devices
- Direct experience owning design test or analysis of rocket engine injectors chambers or nozzles through build and hot fire testing
- Demonstrated proficiency with computer aided design and drafting and experience applying geometric dimensioning and tolerancing per ASME Y14.5
- Strong understanding of closed cycle or staged combustion engine operating principles and liquid rocket engine system integration
- Working knowledge and hands on experience with fluid mechanical and basic electrical systems as applied to propulsion hardware
- Demonstrated ability to independently lead complex hardware or subsystem scope across multiple builds or programs and deliver production ready designs
- Strong understanding of industry standards and requirements and experience working within aerospace or defense quality environments
- Excellent problem solving task management communication and cross functional collaboration skills
Preferred Experience
- Experience leading technical teams or workstreams for combustion devices on development or production engine programs
- Experience with combustion stability analysis injector characterization and combustion device development testing
- Demonstrated proficiency with basic machining practices or close collaboration with machine shops and experience with design for additive manufacturing for hot gas components
- Experience with structural thermal or fluids analysis using tools such as Ansys and or CFD tools for combustor and injector analysis
- Experience with PTC Creo or Siemens NX and PLM systems such as Windchill
- Direct experience with qualification and acceptance of combustion hardware and support of flight or fielded propulsion systems
Colorado law requires us to tell you the base compensation range of this role, which is $155,000 - $193,000, determined by your education, experience, knowledge, skills, and abilities. What we can’t quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy.
Classification: Full-time Exempt
Benefits Include: (Please note, Interns are not eligible for benefits)
- Unlimited PTO - Vacation, Sick, Personal, and Bereavement
- Paid Parental and Adoptive Leave
- Medical, Dental and Vision Insurance
- Tax Advantage Accounts (HSA/FSA)
- Employer Paid Short and Long Term Disability, Basic Life, AD&D
- Additional Benefit Options Including Voluntary Life and Emergency Medical Transport
- EAP Program
- Retirement Savings Plan - 401k with Company Match
How To Apply:
Interested candidates are encouraged to apply by filling out the application below and clicking "Submit Application". This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.
NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.
Must be a U.S. Person (this includes U.S. Citizens and Permanent Residents).
Eligibility to obtain and maintain a U.S. Security Clearance.
We’re an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
No outside recruiters, please.
Source: Ursa Major on Greenhouse · View original posting (opens in new tab)
How this pay compares
Base floor $155,000, above 80% of the 307 Engineering (non-software) roles in Colorado on this site. The employer's range is $38,000 wide, 25% of the floor. Observed open for 2 days so far (since Nov 18, 2026).
Pay in context
Among 307 Engineering (non-software) roles in Colorado listed on this site, the median base floor is $130,000 and the middle half runs from $114,000 to $145,000. This role's floor ($155,000) is above 80% of them; 1 other lists the same floor.
Base floors of 307 Engineering (non-software) roles in Colorado
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 40.7% | 125 |
| $125K to $150K | 37.8% | 116 |
| $150K to $175K | 16.0% | 49 |
| $175K to $200K | 4.6% | 14 |
| $200K to $225K | 0.7% | 2 |
| $225K to $250K | 0.3% | 1 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 307 open postings with this job family in Colorado
- Sample size
- 307
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.
State against nationwide
Median base floor in Colorado vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), Colorado | $130K | 307 |
| Engineering (non-software), all states | $136K | 7,611 |
| This job's base floor (marked) | $155K |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 307 in Colorado; 7611 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Ursa Major pays
13 of Ursa Major's 68 live roles on this site list a higher base floor and 53 list a lower one. Across them the median floor is $122,760; the middle half runs from $114,250 to $143,360.
Base floors of Ursa Major's 68 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 51.5% | 35 |
| $125K to $150K | 25.0% | 17 |
| $150K to $175K | 10.3% | 7 |
| $175K to $200K | 7.4% | 5 |
| $200K to $225K | 1.5% | 1 |
| $225K to $250K | 2.9% | 2 |
| $250K to $275K | 0.0% | 0 |
| $275K and up | 1.5% | 1 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 68 open public roles at this employer
- Sample size
- 68
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in Colorado with the nearest published base floor to $155,000, one per employer.
- Mission Modeling Engineer Albedo · base floor $155,643
- Manager, Mission Design & Analysis Engineering (Clearance Required) Sierra Space Corporation · base floor $157,512
- Sr. HDD Hardware Engineer, S3 Storage Hardrdware, OEM Drives Amazon · base floor $159,200
- Senior Aerospace Engineer Sierra Nevada Corporation (SNC) · base floor $150,661
- Principal Process Engineer Ohr · base floor $160,000
This listingStaff Propulsion Engineer, Combustion Devices, Liquids$155K – $193K
Staff Propulsion Engineer, Fluid & Mechanical Systems, Liquids$155K – $193K
Staff Systems Engineer – Safety & Reliability - Solid Rocket Motors$156K – $195K
Manager, Subcontracts$152,080 – $190,100
Avionics Design Manager$160K – $200K
Staff Design Engineer, Solid Rocket Motor Nozzles$143,360 – $179,200
Staff Design Engineer, Solid Rocket Motor Cases$143,360 – $179,200
Chart as a table
| Role | Published base |
|---|---|
| Staff Propulsion Engineer, Combustion Devices, Liquids (this listing) | $155K - $193K |
| Staff Propulsion Engineer, Fluid & Mechanical Systems, Liquids | $155K - $193K |
| Staff Systems Engineer – Safety & Reliability - Solid Rocket Motors | $156K - $195K |
| Manager, Subcontracts | $152,080 - $190,100 |
| Avionics Design Manager | $160K - $200K |
| Staff Design Engineer, Solid Rocket Motor Nozzles | $143,360 - $179,200 |
| Staff Design Engineer, Solid Rocket Motor Cases | $143,360 - $179,200 |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 18, 2026 (2 days ago).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-11-18
Where this pay comes from
Location as the employer wrote it: Berthoud, Colorado
Colorado law requires us to tell you the base compensation range of this role, which is $155,000 - $193,000, determined by your education, experience, knowledge, skill
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
