Six Figure Work

Staff Propulsion Engineer, Fluid & Mechanical Systems, Liquids

Ursa Major

Company websiteursamajor.com (Ursa Major, opens in new tab)

Base salary $155K – $193K

Employer-published annual base salary, USD. Advertised base range in Berthoud, CO

Apply (opens in new tab)

You apply on the employer's own site. Six Figure Work does not handle applications.

  • LocationBerthoud, CO
  • WorkplaceWorkplace not stated
  • Status at last checkSource accepting applications when checked
  • Last checked (8 h ago) · observed since Last checked 8 h ago. We could not reach the employer's site, so this listing may have closed. Check the employer's page before you apply.

About this job

The future of aerospace and defense starts here. 


Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands. 

Our products and technologies require an extraordinary team. A team that will mold the technologies of tomorrow while delivering today’s best. We are an intrinsically motivated team that has a passion for solving problems and empowering each other every day to develop our skills knowing that there is always room for growth.  

Ursa Major teams move fast and do a lot with little. As a Staff Propulsion Engineer for Fluid and Mechanical Systems you are an advanced technical leader and primary owner for fluid and mechanical hardware and systems across one or more engine programs of various maturities. You will lead clean sheet design development and validation of components and systems such as valves actuators gimbals feed systems and test stand fluid systems. You will drive system architecture and trades solve the most challenging technical problems refine standards and best practices and mentor other engineers. You will own hardware and system roadmaps from concept through qualification and production support and often support multiple engines or product lines at once. Oversee maintenance and continued operation of flight proven hardware. 

Responsibilities  

  • Lead clean sheet design and development of fluid and mechanical engine components including control valves, actuators, gimbals, and feed systems and integrate these into the engine and test stand architectures. 
  • Own fluid and mechanical hardware and subsystems through the full lifecycle, including concept design, detailed design, build, test, qualification, production support, and fielded hardware issue resolution.  
  • Develop and maintain system level fluid architectures including P&IDs, operating concepts, and control strategies for engine and test stand systems and perform trade studies on configuration performance cost risk and operability  
  • Lead performance and sizing analysis for high pressure cryogenic and hot fluid systems including valve sizing, line sizing, pressure drop, cavitation margin, and dynamic response  
  • Develop and improve standards, work instructions, design guides, and acceptance and qualification test approaches for fluid and mechanical components and systems and ensure consistent use across programs  
  • Lead root cause investigations for fluid or mechanical system issues in test or production and drive durable corrective actions in design process and operations  
  • Plan and oversee development qualification and acceptance test campaigns for fluid and mechanical hardware and work closely with test and analysis teams to interpret data and update designs and models  
  • Collaborate with combustion devices systems analysis materials manufacturing avionics and test operations teams to reduce variation improve reliability and enable efficient production and operation of fluid and mechanical systems  
  • Mentor and train junior and senior engineers in fluid system and mechanical design analysis test and development practices and lead design reviews and technical deep dives 
  • Work with purchasing and material control to identify and address supply chain challenges, obsolescence, and vendor quality 

Required Qualifications  

  • Bachelor degree in Mechanical Aerospace or related Engineering field Master preferred  
  • 8 plus years of experience in propulsion or mechanical design roles with significant time focused on fluid and mechanical systems for aerospace or similar high consequence applications  
  • Direct experience owning design test or analysis of high pressure fluid systems and components such as valves actuators regulators manifolds or gimbals through build and test  
  • Strong understanding of fluid mechanics and intuition for high pressure cryogenic and propellant systems and experience with system level fluid architecture and integration  
  • Demonstrated proficiency with computer aided design and drafting and experience applying geometric dimensioning and tolerancing per ASME Y14.5  
  • Working knowledge and hands on experience with fluid mechanical and basic electrical systems as applied to propulsion hardware and control  
  • Experience operating within ISO 9001 or AS9100 environments and working knowledge of aerospace hardware qualification requirements and standards such as SMC S 016  
  • Demonstrated ability to independently lead complex hardware or subsystem scope across multiple builds or programs and deliver production ready designs  
  • Excellent problem solving task management communication and cross functional collaboration skills 

Preferred Experience  

  • Experience leading technical teams or workstreams for fluid and mechanical systems on development or production engine or test stand programs  
  • Hands on test experience with high pressure cryogenic or propellant fluid systems including component and system level testing  
  • Familiarity with closed cycle or staged combustion engine architectures and their fluid system implications  
  • Demonstrated proficiency with basic machining practices or close collaboration with machine shops and experience with design for additive manufacturing for valve and actuator hardware  
  • Experience with structural thermal or fluids analysis using tools such as Ansys and or CFD tools for valve and fluid system analysis  
  • Experience with PTC Creo or Siemens NX and PLM systems such as Windchill  
  • Experience designing components and systems for cryogenic service in oxygen hydrogen or methane and supporting flight qualification or flight hardware operations 

Colorado law requires us to tell you the base compensation range of this role, which is $155,000 - $193,000, determined by your education, experience, knowledge, skills, and abilities. What we can’t quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy. 

Classification: Full-time Exempt

Benefits Include: (Please note, Interns are not eligible for benefits)

  • Unlimited PTO - Vacation, Sick, Personal, and Bereavement
  • Paid Parental and Adoptive Leave
  • Medical, Dental and Vision Insurance
  • Tax Advantage Accounts (HSA/FSA)
  • Employer Paid Short and Long Term Disability, Basic Life, AD&D
  • Additional Benefit Options Including Voluntary Life and Emergency Medical Transport
  • EAP Program
  • Retirement Savings Plan - 401k with Company Match

How To Apply: 
Interested candidates are encouraged to apply by filling out the application below and clicking "Submit Application". This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.

NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.

Must be a U.S. Person (this includes U.S. Citizens and Permanent Residents).

Eligibility to obtain and maintain a U.S. Security Clearance. 

We’re an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

No outside recruiters, please.

Source: Ursa Major on Greenhouse · View original posting (opens in new tab)

How this pay compares

Base floor $155,000, above 80% of the 307 Engineering (non-software) roles in Colorado on this site. The employer's range is $38,000 wide, 25% of the floor. Observed open for 2 days so far (since Nov 18, 2026).

Pay in context

Among 307 Engineering (non-software) roles in Colorado listed on this site, the median base floor is $130,000 and the middle half runs from $114,000 to $145,000. This role's floor ($155,000) is above 80% of them; 1 other lists the same floor.

Base floors of 307 Engineering (non-software) roles in Colorado

Base floors of 307 Engineering (non-software) roles in Colorado$100K to $125K: 40.7% (125); $125K to $150K: 37.8% (116); $150K to $175K: 16.0% (49); $175K to $200K: 4.6% (14); $200K to $225K: 0.7% (2); $225K to $250K: 0.3% (1)0%15%30%45%41%10038%12516%1505%175<1%200<1%225This job $155K
Each bar counts postings on this site by published base floor, in $K. The marker is this job's floor.
Table
Base floors of 307 Engineering (non-software) roles in Colorado
Floor bandSharePostings
$100K to $125K40.7%125
$125K to $150K37.8%116
$150K to $175K16.0%49
$175K to $200K4.6%14
$200K to $225K0.7%2
$225K to $250K0.3%1
How this is calculated
Statistic
Base floor distribution of the cohort
Formula
count of cohort postings in each $25K band of published base floor / postings in the cohort
Denominator
307 open postings with this job family in Colorado
Sample size
307
Hidden when
the cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.

State against nationwide

Median base floor in Colorado vs nationwide

Median published base floor of the same job family, in this state and across all states, next to this job's floor.
Table
Median base floor in Colorado vs nationwide
Valuepostings
Engineering (non-software), Colorado$130K307
Engineering (non-software), all states$136K7,612
This job's base floor (marked)$155K
How this is calculated
Statistic
Median floor, state vs nationwide
Formula
median published base floor of each cohort
Denominator
open postings of this job family
Sample size
307 in Colorado; 7612 nationwide
Hidden when
either cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

How Ursa Major pays

13 of Ursa Major's 68 live roles on this site list a higher base floor and 53 list a lower one. Across them the median floor is $122,760; the middle half runs from $114,250 to $143,360.

Base floors of Ursa Major's 68 live roles

Base floors of Ursa Major's 68 live roles$100K to $125K: 51.5% (35); $125K to $150K: 25.0% (17); $150K to $175K: 10.3% (7); $175K to $200K: 7.4% (5); $200K to $225K: 1.5% (1); $225K to $250K: 2.9% (2); $250K to $275K: 0.0% (0); $275K and up: 1.5% (1)0%15%30%45%60%51%10025%12510%1507%1751%2003%2250%2501%275This job $155K
Each bar counts this employer's live roles by published base floor, in $K. The marker is this job's floor.
Table
Base floors of Ursa Major's 68 live roles
Floor bandShareRoles
$100K to $125K51.5%35
$125K to $150K25.0%17
$150K to $175K10.3%7
$175K to $200K7.4%5
$200K to $225K1.5%1
$225K to $250K2.9%2
$250K to $275K0.0%0
$275K and up1.5%1
How this is calculated
Statistic
Employer base floor distribution
Formula
count of the employer's open roles in each $25K band of published base floor / its open roles
Denominator
68 open public roles at this employer
Sample size
68
Hidden when
this employer has fewer than 5 roles
Calculation version
jobpage-analysis-v1
Data as of
current
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Similar pay elsewhere

Other employers' Engineering (non-software) roles in Colorado with the nearest published base floor to $155,000, one per employer.

This range next to 6 other live Ursa Major roles with the nearest advertised base floor
Chart as a table
This range next to 6 other live Ursa Major roles with the nearest advertised base floor
RolePublished base
Staff Propulsion Engineer, Fluid & Mechanical Systems, Liquids (this listing)$155K - $193K
Staff Propulsion Engineer, Combustion Devices, Liquids$155K - $193K
Staff Systems Engineer – Safety & Reliability - Solid Rocket Motors$156K - $195K
Manager, Subcontracts$152,080 - $190,100
Avionics Design Manager$160K - $200K
Staff Design Engineer, Solid Rocket Motor Nozzles$143,360 - $179,200
Staff Design Engineer, Solid Rocket Motor Cases$143,360 - $179,200

Same $100K to $400K scale as every card. All Ursa Major roles · How to read the bar

Observed changes

No changes to the pay or listing since we first observed this role on Nov 18, 2026 (2 days ago).

  1. First observed on the employer's board, already publishing a qualifying base salary
Observed since
Employer-stated posting date
2026-11-18
Where this pay comes from

Location as the employer wrote it: Berthoud, Colorado

Colorado law requires us to tell you the base compensation range of this role, which is $155,000 - $193,000, determined by your education, experience, knowledge, skill

Method
Employer text, read with fixed rules and re-verified
Checked
Rule set
us-base-v2

The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.

What we verified

  • The pay figures come from the employer's own listing, quoted exactly above.
  • The pay is an annual base salary in US dollars with a minimum of at least $100,000.
  • The role was publicly listed on the employer's job board when last checked.

We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.

Get Six Figure Work by email

Pick what you want. Nothing is selected for you unless it matches the page you are on, and nothing is sent until you confirm from a link we email you.

What would you like to receive?

A short weekly note on what employer-published pay data shows: who pays what, where, and what is changing. Once a week.

Practical notes for job seekers: interviewing, applying for six-figure roles, and making an upward move. About twice a month.

New jobs that match a search you choose. Every job listed has an employer-published base salary of $100,000 or more. At most one email a day (or weekly, your choice). Nothing is sent on days with no new matches. Alerts cover every new job, because this page has no filters.

We email you only after you confirm from a link we send to this address. We do not sell or share your address. Every email has a one-click unsubscribe link. How we handle your email.