Six Figure Work

Manufacturing Engineer - Machining Operations

Seurat Technologies

Company websiteseurat.com (Seurat Technologies, opens in new tab)

Base salary $120K – $150K

Employer-published annual base salary, USD. Advertised base range in Wilmington, MA

Apply (opens in new tab)

You apply on the employer's own site. Six Figure Work does not handle applications.

  • LocationWilmington, MA
  • WorkplaceWorkplace not stated
  • Status at last checkSource accepting applications when checked
  • Last checked (6 h ago) · observed since

About this job

About Seurat 

Seurat Technologies is transforming metal manufacturing through Area Printing®, a proprietary additive manufacturing process pioneered at Lawrence Livermore National Laboratory. By printing an entire area at once rather than tracing each point with a single laser, Area Printing is designed to deliver the quality, throughput, and economics required for serial production. Seurat is producing and shipping metal components today while scaling its technology and factory capacity to compete with conventional manufacturing, reshore critical supply chains, and reduce the environmental impact of industrial production. 

Seurat has raised over $230 million and is backed by leading financial and strategic investors, including NVentures, NVIDIA's venture capital arm; Capricorn's Technology Impact Fund; Honda; Porsche Automobil Holding SE; DENSO; GM Ventures; Siemens Energy Ventures; True Ventures; SIP Global Partners; Cubit Capital; Maniv Mobility; and Xerox Ventures. 

The Manufacturing Engineer – Machining Operations serves as the technical link between additive manufacturing, CNC machining, design engineering, and production operations to ensure parts are manufactured efficiently, consistently, and to the highest quality standards. The position combines hands-on machining and CNC programming with post-processing, fixture and tooling design, manufacturing strategy, capital equipment planning, and continuous improvement.

CNC Machining & Post-Processing
•    Program, set up, and operate CNC machining centers used for secondary operations on metal LPBF components and near net shape components
•    Develop machining strategies to account for complex additively manufactured geometries, residual stress distortion, and limited datum access.
•    Design custom fixtures and workholding solutions for low- and medium-volume production.
•    Optimize tooling, cutting parameters, and machining sequences to improve quality and reduce cycle time.
•    Troubleshoot machining and dimensional issues associated with additive manufacturing.
•    Set up, operate, troubleshoot and improve various post-processing machinery including, bandsaws, EDM equipment, grinders, tumblers and cleaning equipment as required.
•    Perform Design for Manufacturability (DFM) reviews with engineering teams.
•    Manage machining coolant systems, chip recycling, and manufacturing waste streams.
Equipment Development & Manufacturing Scale-Up
•    Specify, evaluate, and source CNC equipment, tooling, metrology systems, and manufacturing support equipment.
•    Lead installation, commissioning, and validation of new manufacturing equipment.
•    Research emerging machining technologies to improve competitiveness.
•    Develop manufacturing capacity plans to support future production growth.
•    Recommend automation opportunities and equipment investments to improve throughput.
Quality & Continuous Improvement
•    Investigate manufacturing issues using structured root cause analysis.
•    Implement corrective and preventive actions to improve product quality.
•    Support process validation, statistical process control (SPC), PFMEA, and control plans.
•    Drive Lean Manufacturing and continuous improvement initiatives across manufacturing operations.
•    Drive process improvements to reduce post-processing time, and improve overall manufacturing efficiency.
Required Qualifications
•    Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or equivalent combination of technical education and substantial hands-on experience.
•    5+ years of manufacturing engineering experience in precision machining, additive manufacturing, or advanced manufacturing.
•    Strong CNC programming and CAM experience; ability to prove out programs safely and troubleshoot machining issues.
•    Proficiency with relevant software such as Hypermill and SolidWorks
•    Strong understanding of machining processes, GD&T, fixture design, and process optimization.
•    Excellent problem-solving and project management skills.
•    Ability and willingness to work hands-on with equipment, technicians, and parts in a development manufacturing environment.

Preferred Qualifications
•    Experience with metal LPBF systems and post-processing workflows.
•    Experience with five-axis machining, probing, toolpath simulation, wire EDM programming, and complex workholding.
•    Experience supporting new product introduction and production scale-up.
•    Familiarity with heat treatment, HIP, support removal, surface finishing, and additive inspection methods.
•    Familiarity with AS9100/ISO 9001, FAI, PFMEA, control plans, SPC, and MSA.
•    Lean Manufacturing and/or Six Sigma certification.
•    Experience with automation or robotic manufacturing systems.

Massachusetts Salary Range

Salary Range

$120,000—$150,000 USD

Seurat Technologies is an Equal Opportunity Employer that values employees with a broad cross-cultural perspective. We strive to create an inclusive environment, empower employees and embrace diversity. We encourage everyone to respond. All applicants will receive fair and impartial treatment without regard to race, color, religion, sex, national origin, ancestry, citizenship status, age, legally protected physical or mental disability, protected veteran status, status in the U.S. uniformed services, sexual orientation, gender identity or expression, marital status, genetic information or on any other basis which is protected under applicable federal, state or local law.

Source: Seurat Technologies on Greenhouse · View original posting (opens in new tab)

How this pay compares

Base floor $120,000, above 31% of the 440 Engineering (non-software) roles in Massachusetts on this site; the other 69% list the same floor or a higher one. The employer's range is $30,000 wide, 25% of the floor. First observed today.

Pay in context

Among 440 Engineering (non-software) roles in Massachusetts listed on this site, the median base floor is $131,643 and the middle half runs from $116,813 to $150,000. This role's floor ($120,000) is above 31% of them; 7 others list the same floor.

Base floors of 440 Engineering (non-software) roles in Massachusetts

Base floors of 440 Engineering (non-software) roles in Massachusetts$100K to $125K: 36.8% (162); $125K to $150K: 36.6% (161); $150K to $175K: 15.0% (66); $175K to $200K: 8.0% (35); $200K to $225K: 3.2% (14); $225K to $250K: 0.5% (2)0%10%20%30%40%37%10037%12515%1508%1753%200<1%225This job $120K
Each bar counts postings on this site by published base floor, in $K. The marker is this job's floor.
Table
Base floors of 440 Engineering (non-software) roles in Massachusetts
Floor bandSharePostings
$100K to $125K36.8%162
$125K to $150K36.6%161
$150K to $175K15.0%66
$175K to $200K8.0%35
$200K to $225K3.2%14
$225K to $250K0.5%2
How this is calculated
Statistic
Base floor distribution of the cohort
Formula
count of cohort postings in each $25K band of published base floor / postings in the cohort
Denominator
440 open postings with this job family in Massachusetts
Sample size
440
Hidden when
the cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.

State against nationwide

Median base floor in Massachusetts vs nationwide

Median published base floor of the same job family, in this state and across all states, next to this job's floor.
Table
Median base floor in Massachusetts vs nationwide
Valuepostings
Engineering (non-software), Massachusetts$131,643440
Engineering (non-software), all states$136K7,614
This job's base floor (marked)$120K
How this is calculated
Statistic
Median floor, state vs nationwide
Formula
median published base floor of each cohort
Denominator
open postings of this job family
Sample size
440 in Massachusetts; 7614 nationwide
Hidden when
either cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Similar pay elsewhere

Other employers' Engineering (non-software) roles in Massachusetts with the nearest published base floor to $120,000, one per employer.

This range next to 1 other live Seurat Technologies role with the nearest advertised base floor
Chart as a table
This range next to 1 other live Seurat Technologies role with the nearest advertised base floor
RolePublished base
Manufacturing Engineer - Machining Operations (this listing)$120K - $150K
Lead Manufacturing Integration Engineer$130K - $150K

Same $100K to $400K scale as every card. All Seurat Technologies roles · How to read the bar

Observed changes

No changes to the pay or listing since we first observed this role on Nov 20, 2026 (today).

  1. First observed on the employer's board, already publishing a qualifying base salary
Observed since
Employer-stated posting date
2026-07-20
Where this pay comes from

Location as the employer wrote it: Wilmington, MA

$120,000—$150,000 USD

Method
Employer text, read with fixed rules and re-verified
Checked
Rule set
us-base-v2

The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.

What we verified

  • The pay figures come from the employer's own listing, quoted exactly above.
  • The pay is an annual base salary in US dollars with a minimum of at least $100,000.
  • The role was publicly listed on the employer's job board when last checked.

We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.

Get Six Figure Work by email

Pick what you want. Nothing is selected for you unless it matches the page you are on, and nothing is sent until you confirm from a link we email you.

What would you like to receive?

A short weekly note on what employer-published pay data shows: who pays what, where, and what is changing. Once a week.

Practical notes for job seekers: interviewing, applying for six-figure roles, and making an upward move. About twice a month.

New jobs that match a search you choose. Every job listed has an employer-published base salary of $100,000 or more. At most one email a day (or weekly, your choice). Nothing is sent on days with no new matches. Alerts cover every new job, because this page has no filters.

We email you only after you confirm from a link we send to this address. We do not sell or share your address. Every email has a one-click unsubscribe link. How we handle your email.