Senior/Principal Mechanical Engineer (Primary Structures)
Company websiteenduranceenergy.com (Endurance Energy, opens in new tab)
Base salary $170K – $250K
Employer-published annual base salary, USD. Advertised base range in Seattle, WA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationSeattle, WA
- WorkplaceOn-site
- Status at last checkSource accepting applications when checked
- Last checked (1 h ago) · observed since
About this job
About Endurance
Endurance is building the world's first modular subsea geothermal power plants, converting vast thermal resources under the ocean into gigawatts of baseload power. Backed by Founders Fund, Felicis, First Round Capital, and Point72 Ventures, our founding team includes veterans from SpaceX, Helion, Blue Origin, and Apple. We have completed multiple deep-ocean deployments to subsea volcanoes and are launching a long-term demonstration project this fall. By leveraging modular design, manufacturing scale, efficient drilling, and latent cooling on the seafloor, we are pioneering a new category of energy that outperforms traditional sources on environmental impact, deployment speed, and cost.
What you'll be doing
The primary structure is the plant. It carries the hot loop, the power electronics, and the connection to the well; it survives the lift, the splash zone, the transit, and the landing on an active hydrothermal field 1-3 km down; and then it stays there for years in seawater at 100-300 bar. We design, build, test, and deploy it.
In this role you will focus on the plant's load-bearing hardware: frames and skids, foundations and seafloor landing systems, lifting and deployment hardware, mooring and anchoring interfaces, and the pressure housings and pressure-tolerant structures that mount to the frame. You will share that scope with a few other engineers, and specific structures will be yours end to end. We avoid pressure vessels where we can through compensated and pressure-tolerant design, but where we cannot, you will design and analyze them. We use ASME, DNV, and API as references and build our own qualification basis through test.
Your First Year
Help deliver the primary structure for our first commercial system, the first subsea geothermal plant to put power on a grid: designed, analyzed, built, qualified, lifted, and landed on the seafloor. The load cases and qualification basis you help establish carry forward to every plant that follows.
How We Work
Our mechanical engineering team is a small group of senior and principal engineers who split the plant's hardware between them. Each engineer owns their hardware end to end: requirements, design, drawings, build, test, and deployment. Principal engineers own the plant architecture, and you will be part of those decisions. We are looking for people who have built hardware, debugged it in the lab or the field, and want to own the result.
Key Responsibilities
Own specific elements of the primary structure end to end: frames, foundations and landing systems, lifting and deployment hardware, or pressure housings
Define structural load cases from first principles: lift through the splash zone, transit, landing on irregular seafloor, thermal expansion of the hot loop, hydrodynamic loads, and long-duration fatigue and corrosion
Size structures with hand calculations, then prove them with FEA: static, fatigue, buckling, external-pressure collapse, and thermal
Design pressure-tolerant and pressure-compensated structures where possible; design and analyze pressure housings where required
Design lifting, rigging, deployment, and recovery hardware and the interfaces to vessels, cranes, and ROVs
Select materials and corrosion strategies for multi-year seawater exposure: cathodic protection, coatings, galvanic isolation, titanium, duplex stainless, and composites
Own weld design and fabrication for your structures and work directly with fabricators on procedures, inspection, and tolerances
Build and test development articles, then qualify full structures: hydrostatic, external-pressure, fatigue, and thermal cycling
Lead root-cause investigations on structural and housing failures and implement corrective actions
Define interfaces with the fluid components, electromechanical hardware, and well connection owned by your peers
Contribute to plant-level architecture decisions alongside our principal engineers
Create detailed 3D CAD models, drawings, and tolerance stacks for large assemblies
Qualifications
Bachelor's degree in mechanical, aerospace, structural, or ocean engineering, or a related engineering discipline
6+ years of professional experience designing and analyzing load-bearing structures for
demanding environments
Ownership of at least one large structure from design through fabrication and fielded use
Preferred Skills
Experience designing primary structures for subsea or offshore systems, submarines or naval vessels, launch vehicles or aircraft, or heavy industrial equipment
Experience designing or analyzing pressure vessels, especially for external pressure, and
familiarity with ASME VIII, DNV, or API
Strong fundamentals in solid mechanics, structural dynamics, and fatigue; comfortable sizing a structure by hand before confirming it with FEA
Fabrication fluency: weld joint design, allowables, NDT and inspection, and tolerancing of large weldments
Experience designing lifting and rigging hardware or working with marine operations
Experience building test articles and running structural qualification tests
Experience at a small or fast-moving hardware organization, where you had to make good
engineering decisions with incomplete information and limited resources
A track record of taking on increasing responsibility and delivering something difficult early in your career
Experience on an engineering competition team (Formula SAE, Baja SAE, RoboSub, rocketry, or similar) or an equivalent self-directed hardware project
Compensation, Benefits, & Perks
As a pre-revenue startup, Endurance Energy offers competitive base salaries and generous equity packages for full-time employees. Final base salary will be determined by an array of factors including internal equity, job-related knowledge, skills, and work experience.
A key aspect of our compensation philosophy is that value creation should be aligned with rewards. Right now this means equity is a significant portion of every full-time employee's compensation. As the company matures, there will be continued evolution and changes to the total rewards and total compensation package. What will always be true is that if we win, we win together. Equity is granted to every full-time employee as a meaningful piece of ownership. We believe the people building the company should share directly in the value they create.
In addition to a competitive base salary and equity, employees will receive all of our other great benefits and perks, including:
Benefits: Health, Dental, and Vision insurance coverage
Time Away: Flexible PTO including 12 paid company holidays
Global Fieldwork: Travel to fascinating deployment sites along oceanic ridges in locations like the Pacific Northwest, Hawaii, Iceland, Japan, New Zealand, and the Azores
Hands-on Experience: Participate in sea trials and deployment operations in partnership with leading oceanographic institutions
Cutting-edge Development: Work with technology that spans high-power electronics, marine systems, and clean energy
Impactful Work: Help solve one of the world's most pressing challenges
Dive Certification: Company-sponsored recreational dive certification
Other Perks: Access to the company boat, free meals and snacks, and the list goes on!
If you’re selected for consideration, a recruiter will be able to discuss in greater detail.
Source: Endurance Energy on Ashby · View original posting (opens in new tab)
How this pay compares
Base floor $170,000, above 81% of the 864 Engineering (non-software) roles in Washington on this site. The employer's range is $80,000 wide, 47% of the floor. Observed open for 15 days so far (since Nov 4, 2026).
Pay in context
Among 864 Engineering (non-software) roles in Washington listed on this site, the median base floor is $136,000 and the middle half runs from $119,954 to $159,200. This role's floor ($170,000) is above 81% of them; 24 others list the same floor.
Base floors of 864 Engineering (non-software) roles in Washington
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 31.4% | 271 |
| $125K to $150K | 34.1% | 295 |
| $150K to $175K | 19.7% | 170 |
| $175K to $200K | 7.1% | 61 |
| $200K to $225K | 4.4% | 38 |
| $225K to $250K | 1.0% | 9 |
| $250K to $275K | 2.1% | 18 |
| $275K and up | 0.2% | 2 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 864 open postings with this job family in Washington
- Sample size
- 864
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.
State against nationwide
Median base floor in Washington vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), Washington | $136K | 864 |
| Engineering (non-software), all states | $136K | 7,614 |
| This job's base floor (marked) | $170K |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 864 in Washington; 7614 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Endurance Energy pays
10 of Endurance Energy's 24 live roles on this site list a higher base floor and 8 list a lower one. Across them the median floor is $170,000; the middle half runs from $150,000 to $200,000.
Base floors of Endurance Energy's 24 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 16.7% | 4 |
| $125K to $150K | 0.0% | 0 |
| $150K to $175K | 41.7% | 10 |
| $175K to $200K | 4.2% | 1 |
| $200K to $225K | 33.3% | 8 |
| $225K to $250K | 0.0% | 0 |
| $250K to $275K | 0.0% | 0 |
| $275K and up | 4.2% | 1 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 24 open public roles at this employer
- Sample size
- 24
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in Washington with the nearest published base floor to $170,000, one per employer.
- Senior RF/mmWave Post-Silicon Validation Engineer K2 Space · base floor $170,000
- Staff Engineer, Survivability (R5885) Shield AI · base floor $170,000
- Principal Propulsion Engineer, Blue Thrusters Blue Origin · base floor $169,624
- GNC Engineer Anduril Industries · base floor $167,000
- Power Conversion Electrical Engineer IV Crane Company · base floor $166,068
This listingSenior/Principal Mechanical Engineer (Primary Structures)$170K – $250K
Senior/Principal Mechanical Engineer (Electromechanical)$170K – $250K
Senior/Principal Mechanical Engineer (Rotating Machinery)$170K – $230K
Senior/Principal Drilling Engineer$170K – $230K
Senior/Principal Supplier Development Engineer$170K – $250K
Senior/Principal Mechanical Engineer (Valves & Components)$170K – $250K
Senior/Principal Integration & Test Engineer (Fluids & Controls)$175K – $250K
Chart as a table
| Role | Published base |
|---|---|
| Senior/Principal Mechanical Engineer (Primary Structures) (this listing) | $170K - $250K |
| Senior/Principal Mechanical Engineer (Electromechanical) | $170K - $250K |
| Senior/Principal Mechanical Engineer (Rotating Machinery) | $170K - $230K |
| Senior/Principal Drilling Engineer | $170K - $230K |
| Senior/Principal Supplier Development Engineer | $170K - $250K |
| Senior/Principal Mechanical Engineer (Valves & Components) | $170K - $250K |
| Senior/Principal Integration & Test Engineer (Fluids & Controls) | $175K - $250K |
Observed changes
- First observed on the employer's board, already publishing a qualifying base salary
- Listing details edited by the employer
- Advertised base range changed
- Observed since
- Employer-stated posting date
- 2026-11-04
Where this pay comes from
Location as the employer wrote it: Seattle, WA
USD 170,000 – 250,000 · 1 YEAR · Salary
- Method
- Structured pay field published by the employer
- Checked
- Rule set
- us-base-v2
The employer's job board publishes this pay as a dedicated data field. We read the field directly; no interpretation was needed.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
