Senior/Principal Mechanical Engineer (Rotating Machinery)
Company websiteenduranceenergy.com (Endurance Energy, opens in new tab)
Base salary $170K – $230K
Employer-published annual base salary, USD. Advertised base range in Seattle, WA
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationSeattle, WA
- WorkplaceOn-site
- Status at last checkSource accepting applications when checked
- Last checked (2 h ago) · observed since
About this job
About Endurance
Endurance is building the world's first modular subsea geothermal power plants, converting vast thermal resources under the ocean into gigawatts of baseload power. Backed by Founders Fund, Felicis, First Round Capital, and Point72 Ventures, our founding team includes veterans from SpaceX, Helion, Blue Origin, and Apple. We have completed multiple deep-ocean deployments to subsea volcanoes and are launching a long-term demonstration project this fall. By leveraging modular design, manufacturing scale, efficient drilling, and latent cooling on the seafloor, we are pioneering a new category of energy that outperforms traditional sources on environmental impact, deployment speed, and cost.
The Role
The motor-generator is central to converting subsea geothermal heat into useful electricity. We need an exceptional hands-on mechanical engineer to own its rotating hardware: shafts and rotor assemblies, bearings, seals, housings, and the precision interfaces that make the machine work reliably under demanding operating conditions.
Your initial focus will be motor-generator hardware, with ownership from architecture and detailed design through manufacturing, assembly, test, and operational support. Your scope will evolve with the program: you should be ready to apply your judgment to other critical mechanical problems while maintaining clear ownership and interfaces. We are looking for deep experience in either turbomachinery or electric motors and generators, backed by a record of delivering difficult hardware. This is a design-and-build role, not an advisory or analysis-only position.
Your First Year
Establish and deliver the motor-generator mechanical design for our next-generation subsea power system. Close the bearing and seal architecture, rotor assembly and operating-clearance design, and interfaces with the turbopump. Build representative test hardware, resolve failures quickly, and use the results to deliver a reliable, manufacturable assembly ready for integrated testing.
How We Work
Our mechanical engineering team is a small group of senior and principal engineers who split the plant's hardware between them. Each engineer owns their hardware end to end: requirements, design, drawings, build, test, and deployment. We are looking for people who have built hardware, debugged it in the lab or the field, and want to own the result.
Responsibilities
• Own motor-generator mechanical hardware end to end, choosing the simplest design that meets the needs of the overall product and delivering it on schedule
• Work across disciplines to define requirements and interfaces where they are unclear, and make design trades that optimize the overall system rather than individual components
• Design rotor and shaft assemblies, bearing arrangements, rotating seals, housings, and precision interfaces for high-speed service
• Create detailed CAD, manufacturing drawings, GD&T, fit and tolerance stack-ups; account for differential thermal growth, deflection, assembly variation, and operating clearances
• Perform and critically review structural, thermal, and rotor-dynamic analyses; validate assumptions with independent calculations, engineering judgment, and test evidence
• Work directly with bearing, seal, and motor suppliers to evaluate designs, close technical gaps, and establish clear interface requirements with the turbopump and electrical system
• Design practical, representative test rigs to retire bearing, seal, and rotor-assembly risks early; lead assembly, instrumentation, testing, and troubleshooting
• Own failure investigations and corrective actions through verified closure, including problems encountered during integrated testing and operations
• Work with manufacturing and suppliers to deliver inspectable, repeatable hardware; resolve nonconformances without losing control of fit, function, or reliability
• Challenge unnecessary complexity and waiting, surface risks early, and accelerate execution without compromising technical rigor
Basic Qualifications
• Bachelor's degree in mechanical engineering or a related engineering discipline
• 6+ years of professional mechanical design experience, with deep expertise in turbomachinery or electric motors and generators
• A demonstrated record of independently delivering demanding rotating hardware from concept through build, test, and successful operation
• Strong command of bearing and seal design or integration, precision fits, GD&T, tolerance stack-ups, and thermal effects on rotating assemblies
• Ability to personally execute detailed design and supporting analysis, diagnose hardware failures, and make sound decisions with incomplete information
Preferred Skills and Experience
• Experience with high-speed rotor assemblies, rotor dynamics, balancing, critical speeds, vibration, and bearing loads or stability
• Experience evaluating rolling-element, fluid-film, or gas bearings and dynamic shaft seals, including lubrication, leakage, wear, and life
• Experience with electric motor or generator mechanical integration, including rotor retention, winding interfaces, cooling, and thermal management
• Experience with high-pressure or high-temperature machinery and compatibility of materials, lubricants, and seals with challenging working fluids
• A record of solving difficult hardware problems through well-designed experiments and carrying the resulting design changes into reliable service
• Experience setting architecture and interfaces across disciplines, raising the quality of design reviews, and helping other engineers deliver exceptional work
Compensation, Benefits, & Perks
As a pre-revenue startup, Endurance Energy offers competitive base salaries and generous equity packages for full-time employees. Final base salary will be determined by an array of factors including internal equity, job-related knowledge, skills, and work experience.
A key aspect of our compensation philosophy is that value creation should be aligned with rewards. Right now this means equity is a significant portion of every full-time employee's compensation. As the company matures, there will be continued evolution and changes to the total rewards and total compensation package. What will always be true is that if we win, we win together. Equity is granted to every full-time employee as a meaningful piece of ownership. We believe the people building the company should share directly in the value they create.
In addition to a competitive base salary and equity, employees will receive all of our other great benefits and perks, including:
Benefits: Health, Dental, and Vision insurance coverage
Time Away: Flexible PTO including 12 paid company holidays
Global Fieldwork: Travel to fascinating deployment sites along oceanic ridges in locations like the Pacific Northwest, Hawaii, Iceland, Japan, New Zealand, and the Azores
Hands-on Experience: Participate in sea trials and deployment operations in partnership with leading oceanographic institutions
Cutting-edge Development: Work with technology that spans high-power electronics, marine systems, and clean energy
Impactful Work: Help solve one of the world's most pressing challenges
Dive Certification: Company-sponsored recreational dive certification
Other Perks: Access to the company boat, free meals and snacks, and the list goes on!
If you’re selected for consideration, a recruiter will be able to discuss in greater detail.
Source: Endurance Energy on Ashby · View original posting (opens in new tab)
How this pay compares
Base floor $170,000, above 81% of the 864 Engineering (non-software) roles in Washington on this site. The employer's range is $60,000 wide, 35% of the floor. Observed open for 3 days so far (since Nov 17, 2026).
Pay in context
Among 864 Engineering (non-software) roles in Washington listed on this site, the median base floor is $136,000 and the middle half runs from $119,954 to $159,200. This role's floor ($170,000) is above 81% of them; 24 others list the same floor.
Base floors of 864 Engineering (non-software) roles in Washington
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 31.4% | 271 |
| $125K to $150K | 34.1% | 295 |
| $150K to $175K | 19.7% | 170 |
| $175K to $200K | 7.1% | 61 |
| $200K to $225K | 4.4% | 38 |
| $225K to $250K | 1.0% | 9 |
| $250K to $275K | 2.1% | 18 |
| $275K and up | 0.2% | 2 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 864 open postings with this job family in Washington
- Sample size
- 864
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.
State against nationwide
Median base floor in Washington vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), Washington | $136K | 864 |
| Engineering (non-software), all states | $136K | 7,612 |
| This job's base floor (marked) | $170K |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 864 in Washington; 7612 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Endurance Energy pays
10 of Endurance Energy's 24 live roles on this site list a higher base floor and 8 list a lower one. Across them the median floor is $170,000; the middle half runs from $150,000 to $200,000.
Base floors of Endurance Energy's 24 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 16.7% | 4 |
| $125K to $150K | 0.0% | 0 |
| $150K to $175K | 41.7% | 10 |
| $175K to $200K | 4.2% | 1 |
| $200K to $225K | 33.3% | 8 |
| $225K to $250K | 0.0% | 0 |
| $250K to $275K | 0.0% | 0 |
| $275K and up | 4.2% | 1 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 24 open public roles at this employer
- Sample size
- 24
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in Washington with the nearest published base floor to $170,000, one per employer.
- Staff Engineer, Survivability (R5885) Shield AI · base floor $170,000
- Senior RF/mmWave Post-Silicon Validation Engineer K2 Space · base floor $170,000
- Principal Propulsion Engineer, Blue Thrusters Blue Origin · base floor $169,624
- GNC Engineer Anduril Industries · base floor $167,000
- Power Conversion Electrical Engineer IV Crane Company · base floor $166,068
This listingSenior/Principal Mechanical Engineer (Rotating Machinery)$170K – $230K
Senior/Principal Mechanical Engineer (Electromechanical)$170K – $250K
Senior/Principal Drilling Engineer$170K – $230K
Senior/Principal Supplier Development Engineer$170K – $250K
Senior/Principal Mechanical Engineer (Valves & Components)$170K – $250K
Senior/Principal Mechanical Engineer (Primary Structures)$170K – $250K
Senior/Principal Integration & Test Engineer (Fluids & Controls)$175K – $250K
Chart as a table
| Role | Published base |
|---|---|
| Senior/Principal Mechanical Engineer (Rotating Machinery) (this listing) | $170K - $230K |
| Senior/Principal Mechanical Engineer (Electromechanical) | $170K - $250K |
| Senior/Principal Drilling Engineer | $170K - $230K |
| Senior/Principal Supplier Development Engineer | $170K - $250K |
| Senior/Principal Mechanical Engineer (Valves & Components) | $170K - $250K |
| Senior/Principal Mechanical Engineer (Primary Structures) | $170K - $250K |
| Senior/Principal Integration & Test Engineer (Fluids & Controls) | $175K - $250K |
Observed changes
No changes to the pay or listing since we first observed this role on Nov 17, 2026 (3 days ago).
- First observed on the employer's board, already publishing a qualifying base salary
- Observed since
- Employer-stated posting date
- 2026-11-16
Where this pay comes from
Location as the employer wrote it: Seattle, WA
USD 170,000 – 230,000 · 1 YEAR · Salary
- Method
- Structured pay field published by the employer
- Checked
- Rule set
- us-base-v2
The employer's job board publishes this pay as a dedicated data field. We read the field directly; no interpretation was needed.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
