Six Figure Work

Senior/Principal Mechanical Engineer (Valves & Components)

Endurance Energy

Company websiteenduranceenergy.com (Endurance Energy, opens in new tab)

Base salary $170K – $250K

Employer-published annual base salary, USD. Advertised base range in Seattle, WA

Apply (opens in new tab)

You apply on the employer's own site. Six Figure Work does not handle applications.

  • LocationSeattle, WA
  • WorkplaceOn-site
  • Status at last checkSource accepting applications when checked
  • Last checked (2 h ago) · observed since

About this job

About Endurance

Endurance is building the world's first modular subsea geothermal power plants, converting vast thermal resources under the ocean into gigawatts of baseload power. Backed by Founders Fund, Felicis, First Round Capital, and Point72 Ventures, our founding team includes veterans from SpaceX, Helion, Blue Origin, and Apple. We have completed multiple deep-ocean deployments to subsea volcanoes and are launching a long-term demonstration project this fall. By leveraging modular design, manufacturing scale, efficient drilling, and latent cooling on the seafloor, we are pioneering a new category of energy that outperforms traditional sources on environmental impact, deployment speed, and cost.

What you'll be doing

Our seafloor power plants move 250-350 °C geothermal fluid through a closed loop 1-3 km underwater, surrounded by near-freezing seawater at 100-300 bar. Every valve, seal, fitting, compensator, and filter in that loop has to hold hot, corrosive, scaling fluid on one side and the deep ocean on the other, for years, with no one able to service it. Nobody makes these parts off the shelf. We design, build, test, and deploy them.

In this role you will focus on the fluid components of the plant: isolation, check, control, and relief valves; seats and seals; fittings, manifolds, and compensators; filters and strainers. You will share that scope with a few other engineers, and specific components will be yours end to end. Most of the work is clean-sheet design. You will size seats and springs, choose materials that survive chlorides, sulfides, and silica scaling at temperature, and build the hot-fluid test rigs that qualify your hardware. This is a natural fit for someone who has designed propulsion valves and wants to apply that experience to a hotter fluid, a higher ambient pressure, and a much longer mission.

Your First Year

Help deliver the fluid-component set for our first commercial system, the first subsea geothermal plant to put power on a grid: designed, built, qualified in our own test cells, and operating on the seafloor. The components you own become the baseline for the plants that follow.

How We Work

Our mechanical engineering team is a small group of senior and principal engineers who split the plant's hardware between them. Each engineer owns their hardware end to end: requirements, design, drawings, build, test, and deployment. Principal engineers own the plant architecture, and you will be part of those decisions. We are looking for people who have built hardware, debugged it in the lab or the field, and want to own the result.

Key Responsibilities

  • Own specific fluid components in the working-fluid loop from requirements through design, qualification, and field performance

  • Design valves (isolation, check, control, relief) and sealing systems for 250-350 °C fluid with 100-300 bar external seawater pressure

  • Select and qualify materials for hot chloride, sulfide, and silica-scaling environments: nickel alloys, duplex stainless steels, titanium, coatings, and hardfacing

  • Perform first-principles flow, thermal, and structural analysis: seat loads at temperature, thermal growth and tolerance stacks, pressure-boundary margins, and fatigue

  • Design and build hot-fluid test rigs; run pressure, endurance, leak, thermal-cycling, and corrosion tests to qualify components

  • Lead root-cause investigations on test and field hardware and implement corrective actions

  • Define interfaces with the actuators and pressure boundaries owned by your peers

  • Work directly with machine shops and specialty suppliers on tight-tolerance parts in exotic alloys

  • Contribute to plant-level fluid-system architecture decisions alongside our principal engineers

  • Create detailed 3D CAD models, drawings, and tolerance stacks

Qualifications

  • Bachelors degree in mechanical engineering, aerospace engineering, or a related engineering discipline

  • 6+ years of professional experience designing, testing, or manufacturing fluid-control hardware (valves, regulators, seals, pumps, or similar) for demanding environments

  • Ownership of at least one fluid component from concept through qualification and fielded use

Preferred Skills

  • Experience designing propulsion valves or flow-control devices for rocket engines or feed systems (cryogenic, hot-gas, or high-pressure)

  • Equivalent depth in subsea oil & gas components (trees, chokes, API 17D/6A), high- temperature steam or geothermal hardware, or nuclear-grade pressure-boundary components

  • Strong understanding of seal and seat design, leakage physics, and seal behavior across large temperature ranges

  • Strong fundamentals in solid mechanics, fluid dynamics, heat transfer, and materials; comfortable with hand calculations and FEA

  • Experience designing and running qualification and acceptance tests and analyzing the results

  • Hands-on experience with GD&T, design for manufacture in hard-to-machine alloys, and time in a machine shop and test cell

  • Experience at a small or fast-moving hardware organization, where you had to make good engineering decisions with incomplete information and limited resources

  • A track record of taking on increasing responsibility and delivering something difficult early in your career

  • Experience on an engineering competition team (Formula SAE, Baja SAE, RoboSub, rocketry, or similar) or an equivalent self-directed hardware project

Compensation, Benefits, & Perks

As a pre-revenue startup, Endurance Energy offers competitive base salaries and generous equity packages for full-time employees. Final base salary will be determined by an array of factors including internal equity, job-related knowledge, skills, and work experience.

A key aspect of our compensation philosophy is that value creation should be aligned with rewards. Right now this means equity is a significant portion of every full-time employee's compensation. As the company matures, there will be continued evolution and changes to the total rewards and total compensation package. What will always be true is that if we win, we win together. Equity is granted to every full-time employee as a meaningful piece of ownership. We believe the people building the company should share directly in the value they create.

In addition to a competitive base salary and equity, employees will receive all of our other great benefits and perks, including:

  • Benefits: Health, Dental, and Vision insurance coverage

  • Time Away: Flexible PTO including 12 paid company holidays

  • Global Fieldwork: Travel to fascinating deployment sites along oceanic ridges in locations like the Pacific Northwest, Hawaii, Iceland, Japan, New Zealand, and the Azores

  • Hands-on Experience: Participate in sea trials and deployment operations in partnership with leading oceanographic institutions

  • Cutting-edge Development: Work with technology that spans high-power electronics, marine systems, and clean energy

  • Impactful Work: Help solve one of the world's most pressing challenges

  • Dive Certification: Company-sponsored recreational dive certification

  • Other Perks: Access to the company boat, free meals and snacks, and the list goes on!

If you’re selected for consideration, a recruiter will be able to discuss in greater detail.

Source: Endurance Energy on Ashby · View original posting (opens in new tab)

How this pay compares

Base floor $170,000, above 81% of the 864 Engineering (non-software) roles in Washington on this site. The employer's range is $80,000 wide, 47% of the floor. Observed open for 15 days so far (since Nov 4, 2026).

Pay in context

Among 864 Engineering (non-software) roles in Washington listed on this site, the median base floor is $136,000 and the middle half runs from $119,954 to $159,200. This role's floor ($170,000) is above 81% of them; 24 others list the same floor.

Base floors of 864 Engineering (non-software) roles in Washington

Base floors of 864 Engineering (non-software) roles in Washington$100K to $125K: 31.4% (271); $125K to $150K: 34.1% (295); $150K to $175K: 19.7% (170); $175K to $200K: 7.1% (61); $200K to $225K: 4.4% (38); $225K to $250K: 1.0% (9); $250K to $275K: 2.1% (18); $275K and up: 0.2% (2)0%10%20%30%40%31%10034%12520%1507%1754%2001%2252%250<1%275This job $170K
Each bar counts postings on this site by published base floor, in $K. The marker is this job's floor.
Table
Base floors of 864 Engineering (non-software) roles in Washington
Floor bandSharePostings
$100K to $125K31.4%271
$125K to $150K34.1%295
$150K to $175K19.7%170
$175K to $200K7.1%61
$200K to $225K4.4%38
$225K to $250K1.0%9
$250K to $275K2.1%18
$275K and up0.2%2
How this is calculated
Statistic
Base floor distribution of the cohort
Formula
count of cohort postings in each $25K band of published base floor / postings in the cohort
Denominator
864 open postings with this job family in Washington
Sample size
864
Hidden when
the cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.

State against nationwide

Median base floor in Washington vs nationwide

Median published base floor of the same job family, in this state and across all states, next to this job's floor.
Table
Median base floor in Washington vs nationwide
Valuepostings
Engineering (non-software), Washington$136K864
Engineering (non-software), all states$136K7,606
This job's base floor (marked)$170K
How this is calculated
Statistic
Median floor, state vs nationwide
Formula
median published base floor of each cohort
Denominator
open postings of this job family
Sample size
864 in Washington; 7606 nationwide
Hidden when
either cohort has fewer than 30 postings
Calculation version
jobpage-analysis-v1
Data as of
2026-11-20
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

How Endurance Energy pays

10 of Endurance Energy's 24 live roles on this site list a higher base floor and 8 list a lower one. Across them the median floor is $170,000; the middle half runs from $150,000 to $200,000.

Base floors of Endurance Energy's 24 live roles

Base floors of Endurance Energy's 24 live roles$100K to $125K: 16.7% (4); $125K to $150K: 0.0% (0); $150K to $175K: 41.7% (10); $175K to $200K: 4.2% (1); $200K to $225K: 33.3% (8); $225K to $250K: 0.0% (0); $250K to $275K: 0.0% (0); $275K and up: 4.2% (1)0%15%30%45%17%1000%12542%1504%17533%2000%2250%2504%275This job $170K
Each bar counts this employer's live roles by published base floor, in $K. The marker is this job's floor.
Table
Base floors of Endurance Energy's 24 live roles
Floor bandShareRoles
$100K to $125K16.7%4
$125K to $150K0.0%0
$150K to $175K41.7%10
$175K to $200K4.2%1
$200K to $225K33.3%8
$225K to $250K0.0%0
$250K to $275K0.0%0
$275K and up4.2%1
How this is calculated
Statistic
Employer base floor distribution
Formula
count of the employer's open roles in each $25K band of published base floor / its open roles
Denominator
24 open public roles at this employer
Sample size
24
Hidden when
this employer has fewer than 5 roles
Calculation version
jobpage-analysis-v1
Data as of
current
Employer set
Open jobs on this site that publish a base salary of $100,000 or more

Similar pay elsewhere

Other employers' Engineering (non-software) roles in Washington with the nearest published base floor to $170,000, one per employer.

This range next to 6 other live Endurance Energy roles with the nearest advertised base floor
Chart as a table
This range next to 6 other live Endurance Energy roles with the nearest advertised base floor
RolePublished base
Senior/Principal Mechanical Engineer (Valves & Components) (this listing)$170K - $250K
Senior/Principal Mechanical Engineer (Electromechanical)$170K - $250K
Senior/Principal Mechanical Engineer (Rotating Machinery)$170K - $230K
Senior/Principal Drilling Engineer$170K - $230K
Senior/Principal Supplier Development Engineer$170K - $250K
Senior/Principal Mechanical Engineer (Primary Structures)$170K - $250K
Senior/Principal Integration & Test Engineer (Fluids & Controls)$175K - $250K

Same $100K to $400K scale as every card. All Endurance Energy roles · How to read the bar

Observed changes

  1. First observed on the employer's board, already publishing a qualifying base salary
  2. Advertised base range changed
  3. Listing details edited by the employer
Observed since
Employer-stated posting date
2026-11-04
Where this pay comes from

Location as the employer wrote it: Seattle, WA

USD 170,000 – 250,000 · 1 YEAR · Salary

Method
Structured pay field published by the employer
Checked
Rule set
us-base-v2

The employer's job board publishes this pay as a dedicated data field. We read the field directly; no interpretation was needed.

What we verified

  • The pay figures come from the employer's own listing, quoted exactly above.
  • The pay is an annual base salary in US dollars with a minimum of at least $100,000.
  • The role was publicly listed on the employer's job board when last checked.

We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.

Get Six Figure Work by email

Pick what you want. Nothing is selected for you unless it matches the page you are on, and nothing is sent until you confirm from a link we email you.

What would you like to receive?

A short weekly note on what employer-published pay data shows: who pays what, where, and what is changing. Once a week.

Practical notes for job seekers: interviewing, applying for six-figure roles, and making an upward move. About twice a month.

New jobs that match a search you choose. Every job listed has an employer-published base salary of $100,000 or more. At most one email a day (or weekly, your choice). Nothing is sent on days with no new matches. Alerts cover every new job, because this page has no filters.

We email you only after you confirm from a link we send to this address. We do not sell or share your address. Every email has a one-click unsubscribe link. How we handle your email.