Senior Propulsion Engineer, Fluid & Mechanical Systems, Draper
Company websiteursamajor.com (Ursa Major, opens in new tab)
Base salary $121K – $152K
Employer-published annual base salary, USD. Advertised base range in Berthoud, CO
You apply on the employer's own site. Six Figure Work does not handle applications.
- LocationBerthoud, CO
- WorkplaceWorkplace not stated
- Status at last checkSource accepting applications when checked
- Last checked (5 h ago) · observed since
About this job
The future of aerospace and defense starts here.
Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands.
Ursa Major’s teams move fast and do a lot with little. We are looking for a skilled, fast learning individual who will serve as a central member of the team and take immediate ownership of fluid and mechanical system design efforts as a responsible engineer. This role will be part of the technical organization, responsible for clean sheet design, development, and validation of a variety of propulsion hardware, as well as technical guidance and mentoring of a team responsible for similar hardware. Candidates will be expected to have ownership from the initial concept phase to a production-ready design.
Responsibilities:
- Clean sheet design of fluid & mechanical engine components including gimbals, actuators, valves, and fluid systems
- Design modifications of existing components and prototypes to increase performance, improve manufacturability or resolve limitations
- Work with other engineers at Ursa Major on topics including design of components, system sizing, component testing, and system-level architecture and development
- Derive requirements from top level engine and test objectives
- Write, review, and update work instructions for the assembly of engine components as well as establish appropriate acceptance and qualification tests
- Assemble and test first article prototypes
- Work closely with interfacing teams to ensure successful integration of component designs into the engine system
- Support validation and recursive design during engine development
Required Qualifications
- Bachelor’s degree in engineering
- 4+ years of relevant mechanical design experience
- Electromechanical and pneumatic actuator design experience
- Experience testing high-pressure fluid systems
- Demonstrated proficiency with computer aided design and drafting
- Experience with geometric dimensioning and tolerancing per ASME Y14.5
- Strong understanding of industry standards and requirements
- Desire to take ownership and help wherever needed on the team
- Able to delegate tasks and lead large project scope
- Ability to work in a fast-paced environment and stay flexible based on customer demands and company priorities along with daily firefighting
Desired Experience
- Master's or PhD in engineering
- Demonstrated proficiency with fundamental manual or CNC machining equipment and processes (milling, turning)
- Demonstrated proficiency with basic principles of design for additive manufacturing
- Liquid propellant rocket engine design, test, or analysis
- Experience operating in ISO 9001 or AS9100 certified organizations.
- Experience with SMC-S-016 Test Requirements
- Experience with structural, fluids, and thermal analysis using Ansys FEA software
- 2+ years of PTC Creo or Siemens NX CAD programs and Windchill PLM software
- Direct experience with flight qualification and flight support
Colorado law requires us to tell you the base compensation range of this role, which is $121,000 - $152,000, determined by your education, experience, knowledge, skills, and abilities. What we can’t quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy.
Classification: Full-time Exempt
Benefits Include: (Please note, Interns are not eligible for benefits)
- Unlimited PTO - Vacation, Sick, Personal, and Bereavement
- Paid Parental and Adoptive Leave
- Medical, Dental and Vision Insurance
- Tax Advantage Accounts (HSA/FSA)
- Employer Paid Short and Long Term Disability, Basic Life, AD&D
- Additional Benefit Options Including Voluntary Life and Emergency Medical Transport
- EAP Program
- Retirement Savings Plan - 401k with Company Match
How To Apply:
Interested candidates are encouraged to apply by filling out the application below and clicking "Submit Application". This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.
NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.
Must be a U.S. Person (this includes U.S. Citizens and Permanent Residents).
Eligibility to obtain and maintain a U.S. Security Clearance.
We’re an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
No outside recruiters, please.
Source: Ursa Major on Greenhouse · View original posting (opens in new tab)
How this pay compares
Base floor $121,000, above 37% of the 307 Engineering (non-software) roles in Colorado on this site; the other 63% list the same floor or a higher one. The employer's range is $31,000 wide, 26% of the floor. Observed open for 16 days so far (since Nov 4, 2026).
Pay in context
Among 307 Engineering (non-software) roles in Colorado listed on this site, the median base floor is $130,000 and the middle half runs from $114,000 to $145,000. This role's floor ($121,000) is above 37% of them; 1 other lists the same floor.
Base floors of 307 Engineering (non-software) roles in Colorado
Table
| Floor band | Share | Postings |
|---|---|---|
| $100K to $125K | 40.7% | 125 |
| $125K to $150K | 37.8% | 116 |
| $150K to $175K | 16.0% | 49 |
| $175K to $200K | 4.6% | 14 |
| $200K to $225K | 0.7% | 2 |
| $225K to $250K | 0.3% | 1 |
How this is calculated
- Statistic
- Base floor distribution of the cohort
- Formula
- count of cohort postings in each $25K band of published base floor / postings in the cohort
- Denominator
- 307 open postings with this job family in Colorado
- Sample size
- 307
- Hidden when
- the cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Only jobs on this site count, and each one publishes a base salary of $100,000 or more, so this compares six-figure jobs with each other, not with the whole market. Computed Nov 20, 2026.
State against nationwide
Median base floor in Colorado vs nationwide
Table
| Value | postings | |
|---|---|---|
| Engineering (non-software), Colorado | $130K | 307 |
| Engineering (non-software), all states | $136K | 7,614 |
| This job's base floor (marked) | $121K |
How this is calculated
- Statistic
- Median floor, state vs nationwide
- Formula
- median published base floor of each cohort
- Denominator
- open postings of this job family
- Sample size
- 307 in Colorado; 7614 nationwide
- Hidden when
- either cohort has fewer than 30 postings
- Calculation version
- jobpage-analysis-v1
- Data as of
- 2026-11-20
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
How Ursa Major pays
35 of Ursa Major's 68 live roles on this site list a higher base floor and 31 list a lower one. Across them the median floor is $122,760; the middle half runs from $114,250 to $143,360.
Base floors of Ursa Major's 68 live roles
Table
| Floor band | Share | Roles |
|---|---|---|
| $100K to $125K | 51.5% | 35 |
| $125K to $150K | 25.0% | 17 |
| $150K to $175K | 10.3% | 7 |
| $175K to $200K | 7.4% | 5 |
| $200K to $225K | 1.5% | 1 |
| $225K to $250K | 2.9% | 2 |
| $250K to $275K | 0.0% | 0 |
| $275K and up | 1.5% | 1 |
How this is calculated
- Statistic
- Employer base floor distribution
- Formula
- count of the employer's open roles in each $25K band of published base floor / its open roles
- Denominator
- 68 open public roles at this employer
- Sample size
- 68
- Hidden when
- this employer has fewer than 5 roles
- Calculation version
- jobpage-analysis-v1
- Data as of
- current
- Employer set
- Open jobs on this site that publish a base salary of $100,000 or more
Similar pay elsewhere
Other employers' Engineering (non-software) roles in Colorado with the nearest published base floor to $121,000, one per employer.
- Senior Electrical Engineer ALTEN Technology USA · base floor $120,000
- Quality Executive Swinerton · base floor $120,000
- Manufacturing Engineer - 1108 Quantinuum · base floor $120,000
- Piping Engineer 3 Amentum · base floor $120,000
- Superintendent DPR Construction · base floor $120,000
This listingSenior Propulsion Engineer, Fluid & Mechanical Systems, Draper$121K – $152K
Senior Mission Engineer$120K – $150K
Senior Mission Integration Engineer, Cryo$120K – $150K
Senior Design Engineer, Solid Rocket Motor Ignition Systems$120,720 – $150,900
Senior Propulsion Engineer, Combustion Devices, Liquids$121K – $152K
Lead, Test Engineer, In-Space$118,000 – $147,500
Senior Electrical Engineer$118K – $147K
Chart as a table
| Role | Published base |
|---|---|
| Senior Propulsion Engineer, Fluid & Mechanical Systems, Draper (this listing) | $121K - $152K |
| Senior Mission Engineer | $120K - $150K |
| Senior Mission Integration Engineer, Cryo | $120K - $150K |
| Senior Design Engineer, Solid Rocket Motor Ignition Systems | $120,720 - $150,900 |
| Senior Propulsion Engineer, Combustion Devices, Liquids | $121K - $152K |
| Lead, Test Engineer, In-Space | $118,000 - $147,500 |
| Senior Electrical Engineer | $118K - $147K |
Observed changes
- First observed on the employer's board, already publishing a qualifying base salary
- Listing details edited by the employer
- Observed since
- Employer-stated posting date
- 2026-08-11
Where this pay comes from
Location as the employer wrote it: Berthoud, Colorado
Colorado law requires us to tell you the base compensation range of this role, which is $121,000 - $152,000, determined by your education, experience, knowledge, skill
- Method
- Employer text, read with fixed rules and re-verified
- Checked
- Rule set
- us-base-v2
The pay passage appears in the employer's own job text. Fixed, deterministic rules located it, and the passage below was checked against the stored copy of the posting.
What we verified
- The pay figures come from the employer's own listing, quoted exactly above.
- The pay is an annual base salary in US dollars with a minimum of at least $100,000.
- The role was publicly listed on the employer's job board when last checked.
We do not verify what the employer will actually offer, whether the employer is still recruiting for the role, or anything beyond what the employer published. Full methodology.
